Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Grey aluminium dual-bay M.2 SATA enclosure with USB-C port and clone button

MAIWO

MAIWO Dual Bay M.2 SATA Enclosure Cloner USB 3.1 Gen 2 Type-C Grey

SKU CH-7FKD-5EM4K

Dual-bay M.2 SATA enclosure with offline one-key cloning and USB 3.1 Gen 2 Type-C up to 500 MB/s

  • SizeM.2
  • ColorGrey
  • External InterfaceUSB 3.1 Gen 2 Type-C
  • AC AdapterYes
  • MaterialAluminum
  • TypeEnclosure
  • Tool-free installation with no drivers required
  • Offline one-key clone without a PC connection
  • USB 3.1 Gen 2 Type-C up to 500 MB/s
  • Aluminium shell with silicone heat sink for cooling
  • Supports M.2 SATA 2230, 2242, 2260, 2280 B and B+M key SSDs

Dual Bay M.2 SATA Enclosure

This dual bay enclosure accepts M.2 SATA SSDs with B key or B+M key in 2230, 2242, 2260 and 2280 lengths. It connects via USB 3.1 Gen 2 Type-C and includes an AC adapter for power. The aluminium shell and silicone thermal pad provide passive cooling for sustained operation.

Ideal for SATA cloning and storage expansion

Suits users who want to duplicate a SATA system disk without a computer or add external SATA storage to Windows, macOS or Linux devices. Not for anyone needing NVMe or PCIe AHCI support, or anyone whose drives exceed the listed M.2 form factors.

Offline one-key clone function

Press the clone button with power connected to copy data from the source SSD to a larger target SSD without a PC. The target drive capacity must be greater than the source drive capacity for the operation to succeed.

Põhijooned

  • Tool-free installation with no drivers required
  • Offline one-key clone without a PC connection
  • USB 3.1 Gen 2 Type-C up to 500 MB/s
  • Aluminium shell with silicone heat sink for cooling
  • Supports M.2 SATA 2230, 2242, 2260, 2280 B and B+M key SSDs

Tehnilised andmed

BrandMAIWO
SeriesDual Bay M.2 SATA Duplicator
ModelM.2 SSD Enclosure
SizeM.2
ColorGrey
External InterfaceUSB 3.1 Gen 2 Type-C
AC AdapterYes
MaterialAluminum
TypeEnclosure

Küsimused selle toote kohta

What real-world speed should I expect from the 5 Gbps USB 3.1 Gen 2 Type-C link when the enclosure is in a PC?

The enclosure tops out at the SATA III ceiling of about 500 MB/s, so even though the port is rated for 5 Gbps you will see SATA speeds, not the full USB bandwidth.

Does the USB 3.1 Gen 2 Type-C port also carry PCIe or NVMe traffic, or is it limited to SATA?

It is a SATA-only bridge; the controller does not pass PCIe or NVMe signals, so NVMe drives will not be recognised.

Which M.2 lengths and key types fit the two bays without an adapter?

Both slots accept B-key and B+M-key SATA SSDs in 2230, 2242, 2260 and 2280 form factors; 22110 and single M-key NVMe modules are not supported.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.