Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava

MAIWO

MAIWO Dual Bay M.2 SATA Enclosure Cloner USB 3.1 Gen 2 Type-C Grey

SKU CH-7FKD-5EM4K

Dual-bay M.2 SATA enclosure with offline one-key cloning and USB 3.1 Gen 2 Type-C up to 500 MB/s

  • SizeM.2
  • ColorGrey
  • External InterfaceUSB 3.1 Gen 2 Type-C
  • AC AdapterYes
  • MaterialAluminum
  • TypeEnclosure
  • Tool-free installation with no drivers required
  • Offline one-key clone without a PC connection
  • USB 3.1 Gen 2 Type-C up to 500 MB/s
  • Aluminium shell with silicone heat sink for cooling
  • Supports M.2 SATA 2230, 2242, 2260, 2280 B and B+M key SSDs

Dual Bay M.2 SATA Enclosure

This dual bay enclosure accepts M.2 SATA SSDs with B key or B+M key in 2230, 2242, 2260 and 2280 lengths. It connects via USB 3.1 Gen 2 Type-C and includes an AC adapter for power. The aluminium shell and silicone thermal pad provide passive cooling for sustained operation.

Ideal for SATA cloning and storage expansion

Suits users who want to duplicate a SATA system disk without a computer or add external SATA storage to Windows, macOS or Linux devices. Not for anyone needing NVMe or PCIe AHCI support, or anyone whose drives exceed the listed M.2 form factors.

Offline one-key clone function

Press the clone button with power connected to copy data from the source SSD to a larger target SSD without a PC. The target drive capacity must be greater than the source drive capacity for the operation to succeed.

Poudarki

  • Tool-free installation with no drivers required
  • Offline one-key clone without a PC connection
  • USB 3.1 Gen 2 Type-C up to 500 MB/s
  • Aluminium shell with silicone heat sink for cooling
  • Supports M.2 SATA 2230, 2242, 2260, 2280 B and B+M key SSDs

Specifikacije

BrandMAIWO
SeriesDual Bay M.2 SATA Duplicator
ModelM.2 SSD Enclosure
SizeM.2
ColorGrey
External InterfaceUSB 3.1 Gen 2 Type-C
AC AdapterYes
MaterialAluminum
TypeEnclosure

Vprašanja o tem izdelku

What real-world speed should I expect from the 5 Gbps USB 3.1 Gen 2 Type-C link when the enclosure is in a PC?

The enclosure tops out at the SATA III ceiling of about 500 MB/s, so even though the port is rated for 5 Gbps you will see SATA speeds, not the full USB bandwidth.

Does the USB 3.1 Gen 2 Type-C port also carry PCIe or NVMe traffic, or is it limited to SATA?

It is a SATA-only bridge; the controller does not pass PCIe or NVMe signals, so NVMe drives will not be recognised.

Which M.2 lengths and key types fit the two bays without an adapter?

Both slots accept B-key and B+M-key SATA SSDs in 2230, 2242, 2260 and 2280 form factors; 22110 and single M-key NVMe modules are not supported.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.