SPARTAN
SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
1 504,99 $
0.01943804BTC
Laos
Micron
Micron 7450 PRO 3.84TB M.2 22110 NVMe PCI-Express 4.0 MTFDKBG3T8TFR-1BC1ZABYYR
Enterprise 3.84TB M.2 22110 NVMe PCI-Express 4.0 drive with 7300TBW endurance
- Device TypeInternal Solid State Drive (SSD)
- Used ForEnterprise
- Form FactorM.2 22110
- Capacity3.84TB
- InterfacePCI-Express 4.0 x4
- ProtocolNVMe 2.0
- 84 TB capacity supports large enterprise datasets
- PCI-Express 4.0 x4 interface delivers up to 4400 MBps sequential read
- NVMe 2.0 protocol enables up to 2600 MBps sequential write
- 7300 TBW endurance rating suits write-intensive workloads
- M.2 22110 form factor fits compatible enterprise servers
Enterprise M.2 22110 NVMe SSD
The Micron 7450 PRO is a 3.84TB internal solid-state drive built for enterprise workloads. It uses the M.2 22110 form factor and connects through a PCI-Express 4.0 x4 interface with NVMe 2.0 protocol. The drive delivers sequential reads up to 4400 MBps and writes up to 2600 MBps.
Suited for write-intensive servers, less for laptops
This SSD targets servers and storage arrays that demand sustained write endurance, rated at 7300TB written. Systems limited to shorter M.2 slots cannot accommodate the 110 mm length. Consumer desktops without enterprise-grade cooling or power-loss protection should evaluate alternatives.
Steady throughput under continuous writes
Under sustained load the drive maintains its rated sequential write speed rather than throttling after a short burst. The 7300TB endurance rating reflects consistent performance across the warranty period. Thermal management relies on system airflow since no heatsink is included.
Põhijooned
- 84 TB capacity supports large enterprise datasets
- PCI-Express 4.0 x4 interface delivers up to 4400 MBps sequential read
- NVMe 2.0 protocol enables up to 2600 MBps sequential write
- 7300 TBW endurance rating suits write-intensive workloads
- M.2 22110 form factor fits compatible enterprise servers
Tehnilised andmed
| Brand | Micron |
|---|---|
| Series | 7450 PRO |
| Model | MTFDKBG3T8TFR-1BC1ZABYYR |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Enterprise |
| Form Factor | M.2 22110 |
| Capacity | 3.84TB |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe 2.0 |
| Max Sequential Read | Up to 4400 MBps |
| Max Sequential Write | Up to 2600 MBps |
| Terabytes Written (TBW) | 7300TB |
| HeatSink | without HeatSink |
| Height | 2.200 |
| Width | 7.000 |
| Weight | 0.0441 |
| Tarnekaal | 0.02 kg |
| Pakendi mõõtmed | 25 × 25 × 25 mm |
Küsimused selle toote kohta
Does my motherboard need an M.2 22110 slot and PCIe 4.0 x4 wiring to use this 3.84TB drive?
Yes, the drive is an M.2 22110 module that requires a matching 110 mm slot and a PCIe 4.0 x4 electrical connection for full NVMe 2.0 operation.
Will this SSD run on a platform that only supports PCIe 3.0 x4?
The drive will operate at PCIe 3.0 x4 speeds on an older platform, reducing sequential throughput below the 4400 MBps read and 2600 MBps write ceiling.
How can I verify the 7450 PRO is delivering its rated 4400 MBps read and 2600 MBps write after installation?
Run a sequential benchmark such as CrystalDiskMark or fio with a large-block workload and compare the results to the 4400 MBps read and 2600 MBps write specifications.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
Acumen Disc
Acumen Disc H11-SATA150 1-to-11 SATA Duplicator 150MB/s
- Hard Drive Duplicat…
- 1 to 11
1 633,99 $
0.02110417BTC
Laos