Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Green circuit board M.2 22110 SSD with black controller and NAND chips

Micron

Micron 7450 PRO 3.84TB M.2 22110 NVMe PCI-Express 4.0 MTFDKBG3T8TFR-1BC1ZABYYR

SKU CH-V4WS-8S9HF MPN MTFDKBG3T8TFR-1BC1ZABYYR

Enterprise 3.84TB M.2 22110 NVMe PCI-Express 4.0 drive with 7300TBW endurance

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForEnterprise
  • Form FactorM.2 22110
  • Capacity3.84TB
  • InterfacePCI-Express 4.0 x4
  • ProtocolNVMe 2.0
  • 84 TB capacity supports large enterprise datasets
  • PCI-Express 4.0 x4 interface delivers up to 4400 MBps sequential read
  • NVMe 2.0 protocol enables up to 2600 MBps sequential write
  • 7300 TBW endurance rating suits write-intensive workloads
  • M.2 22110 form factor fits compatible enterprise servers

Enterprise M.2 22110 NVMe SSD

The Micron 7450 PRO is a 3.84TB internal solid-state drive built for enterprise workloads. It uses the M.2 22110 form factor and connects through a PCI-Express 4.0 x4 interface with NVMe 2.0 protocol. The drive delivers sequential reads up to 4400 MBps and writes up to 2600 MBps.

Suited for write-intensive servers, less for laptops

This SSD targets servers and storage arrays that demand sustained write endurance, rated at 7300TB written. Systems limited to shorter M.2 slots cannot accommodate the 110 mm length. Consumer desktops without enterprise-grade cooling or power-loss protection should evaluate alternatives.

Steady throughput under continuous writes

Under sustained load the drive maintains its rated sequential write speed rather than throttling after a short burst. The 7300TB endurance rating reflects consistent performance across the warranty period. Thermal management relies on system airflow since no heatsink is included.

Ciri-ciri utama

  • 84 TB capacity supports large enterprise datasets
  • PCI-Express 4.0 x4 interface delivers up to 4400 MBps sequential read
  • NVMe 2.0 protocol enables up to 2600 MBps sequential write
  • 7300 TBW endurance rating suits write-intensive workloads
  • M.2 22110 form factor fits compatible enterprise servers

Spesifikasi

BrandMicron
Series7450 PRO
ModelMTFDKBG3T8TFR-1BC1ZABYYR
Device TypeInternal Solid State Drive (SSD)
Used ForEnterprise
Form FactorM.2 22110
Capacity3.84TB
InterfacePCI-Express 4.0 x4
ProtocolNVMe 2.0
Max Sequential ReadUp to 4400 MBps
Max Sequential WriteUp to 2600 MBps
Terabytes Written (TBW)7300TB
HeatSinkwithout HeatSink
Height2.200
Width7.000
Weight0.0441
Berat penghantaran0.02 kg
Dimensi bungkusan25 × 25 × 25 mm

Soalan tentang produk ini

Does my motherboard need an M.2 22110 slot and PCIe 4.0 x4 wiring to use this 3.84TB drive?

Yes, the drive is an M.2 22110 module that requires a matching 110 mm slot and a PCIe 4.0 x4 electrical connection for full NVMe 2.0 operation.

Will this SSD run on a platform that only supports PCIe 3.0 x4?

The drive will operate at PCIe 3.0 x4 speeds on an older platform, reducing sequential throughput below the 4400 MBps read and 2600 MBps write ceiling.

How can I verify the 7450 PRO is delivering its rated 4400 MBps read and 2600 MBps write after installation?

Run a sequential benchmark such as CrystalDiskMark or fio with a large-block workload and compare the results to the 4400 MBps read and 2600 MBps write specifications.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.