Intel
Intel DC S3610 SSDSC2BX016T401 1.6TB 2.5" SATA enterprise SSD
- 2.5"
- 1.6TB
$1,299
0.01679879BTC
In stock
Micron
Micron 7450 PRO 3.84TB M.2 22110 NVMe PCI-Express 4.0 MTFDKBG3T8TFR-1BC1ZABYYR
Enterprise 3.84TB M.2 22110 NVMe PCI-Express 4.0 drive with 7300TBW endurance
- Device TypeInternal Solid State Drive (SSD)
- Used ForEnterprise
- Form FactorM.2 22110
- Capacity3.84TB
- InterfacePCI-Express 4.0 x4
- ProtocolNVMe 2.0
- 84 TB capacity supports large enterprise datasets
- PCI-Express 4.0 x4 interface delivers up to 4400 MBps sequential read
- NVMe 2.0 protocol enables up to 2600 MBps sequential write
- 7300 TBW endurance rating suits write-intensive workloads
- M.2 22110 form factor fits compatible enterprise servers
Enterprise M.2 22110 NVMe SSD
The Micron 7450 PRO is a 3.84TB internal solid-state drive built for enterprise workloads. It uses the M.2 22110 form factor and connects through a PCI-Express 4.0 x4 interface with NVMe 2.0 protocol. The drive delivers sequential reads up to 4400 MBps and writes up to 2600 MBps.
Suited for write-intensive servers, less for laptops
This SSD targets servers and storage arrays that demand sustained write endurance, rated at 7300TB written. Systems limited to shorter M.2 slots cannot accommodate the 110 mm length. Consumer desktops without enterprise-grade cooling or power-loss protection should evaluate alternatives.
Steady throughput under continuous writes
Under sustained load the drive maintains its rated sequential write speed rather than throttling after a short burst. The 7300TB endurance rating reflects consistent performance across the warranty period. Thermal management relies on system airflow since no heatsink is included.
Highlights
- 84 TB capacity supports large enterprise datasets
- PCI-Express 4.0 x4 interface delivers up to 4400 MBps sequential read
- NVMe 2.0 protocol enables up to 2600 MBps sequential write
- 7300 TBW endurance rating suits write-intensive workloads
- M.2 22110 form factor fits compatible enterprise servers
Specifications
| Brand | Micron |
|---|---|
| Series | 7450 PRO |
| Model | MTFDKBG3T8TFR-1BC1ZABYYR |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Enterprise |
| Form Factor | M.2 22110 |
| Capacity | 3.84TB |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe 2.0 |
| Max Sequential Read | Up to 4400 MBps |
| Max Sequential Write | Up to 2600 MBps |
| Terabytes Written (TBW) | 7300TB |
| HeatSink | without HeatSink |
| Height | 2.200 |
| Width | 7.000 |
| Weight | 0.0441 |
| Shipping weight | 0.02 kg |
| Package size | 25 × 25 × 25 mm |
Questions about this item
Does my motherboard need an M.2 22110 slot and PCIe 4.0 x4 wiring to use this 3.84TB drive?
Yes, the drive is an M.2 22110 module that requires a matching 110 mm slot and a PCIe 4.0 x4 electrical connection for full NVMe 2.0 operation.
Will this SSD run on a platform that only supports PCIe 3.0 x4?
The drive will operate at PCIe 3.0 x4 speeds on an older platform, reducing sequential throughput below the 4400 MBps read and 2600 MBps write ceiling.
How can I verify the 7450 PRO is delivering its rated 4400 MBps read and 2600 MBps write after installation?
Run a sequential benchmark such as CrystalDiskMark or fio with a large-block workload and compare the results to the 4400 MBps read and 2600 MBps write specifications.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Solidigm
Solidigm D7-P5520 7.68TB U.2 15mm enterprise SSD SSDPF2KX076T11Z
- U.2 15mm
- 7.68TB
$5,806
0.07508374BTC
In stock
Solidigm
Solidigm D5-P5430 15.36TB U.2 enterprise SSD SBFPF2BU153T001
- U.2 15mm
- 15.36TB
$10,818
0.13989939BTC
In stock
Solidigm
Solidigm D5-P5430 7.68TB U.2 15mm enterprise SSD SBFPF2BU076T001
- U.2 15mm
- 7.68TB
$5,493
0.07103599BTC
In stock