Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Metal enclosed switching power supply with voltage selector switch and cooling fan

myVolts

myVolts 24V 15A 360W Switching Power Supply

SKU CH-KJA2-A0YCC

Converts 110V or 220V AC to 24V DC at 15A with 360W output, adjustable trim-pot, and overload, short-circuit and over-voltage protection

  • TypeAT
  • Converts AC 110V/220V to DC 24V 15A 360W
  • Adjustable output voltage from 20.89V to 29.94V via trim-pot
  • Auto-reset protection against short-circuit, overload and over-voltage 115%-135%
  • Cooling fan activates automatically for low-temperature operation
  • Suitable for continuous use up to 40% load at 60°C

24V 360W Switching Power Supply

The myVolts 24V 15A 360W Switching Power Supply converts AC 110V or 220V input to a regulated DC 24V output rated at 15A. It suits industrial automation, LED displays, communications equipment, computer projects, 3D printers and CCTV systems that require a steady 24V source. The unit delivers 360W maximum power with an adjustable trim-pot for fine voltage tuning.

Installation and common issues

A voltage selector switch on the chassis must be set to the correct AC input (110V or 220V) before the unit is energised; failure to do so will damage the supply. An auto on/off cooling fan manages thermals, while built-in short-circuit, overload and over-voltage protection (115%-135%) cut off the output and auto-reset. Professional installation by a licensed electrician is highly recommended.

Pre-order checklist

Verify that your load operates at 24V and draws less than 360W; continuous 24/7 operation should not exceed 40% of the full 360W rating. Confirm the ambient temperature stays within -10 to 60 degrees Celsius. Ensure the AC mains available at the install site matches either 110V or 220V so the selector switch can be set correctly.

Põhijooned

  • Converts AC 110V/220V to DC 24V 15A 360W
  • Adjustable output voltage from 20.89V to 29.94V via trim-pot
  • Auto-reset protection against short-circuit, overload and over-voltage 115%-135%
  • Cooling fan activates automatically for low-temperature operation
  • Suitable for continuous use up to 40% load at 60°C

Tehnilised andmed

TypeAT

Küsimused selle toote kohta

How do I confirm the supply is delivering the correct voltage after installation?

Measure the DC output with a multimeter; out of the box it reads 24.19 V, the trim-pot adjusts down to 20.89 V and up to 29.94 V.

What comes in the box and what must I source separately?

The unit itself is supplied; you must provide an AC mains cord for the 110 V or 220 V input and the DC wiring to your load.

Which input-voltage setting should I select for my region?

Use the external switch to choose 110 V or 220 V AC before powering on, matching your local mains supply.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.