Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Metal enclosed switching power supply with voltage selector switch and cooling fan

myVolts

myVolts 24V 15A 360W Switching Power Supply

SKU CH-KJA2-A0YCC

Converts 110V or 220V AC to 24V DC at 15A with 360W output, adjustable trim-pot, and overload, short-circuit and over-voltage protection

  • TypeAT
  • Converts AC 110V/220V to DC 24V 15A 360W
  • Adjustable output voltage from 20.89V to 29.94V via trim-pot
  • Auto-reset protection against short-circuit, overload and over-voltage 115%-135%
  • Cooling fan activates automatically for low-temperature operation
  • Suitable for continuous use up to 40% load at 60°C

24V 360W Switching Power Supply

The myVolts 24V 15A 360W Switching Power Supply converts AC 110V or 220V input to a regulated DC 24V output rated at 15A. It suits industrial automation, LED displays, communications equipment, computer projects, 3D printers and CCTV systems that require a steady 24V source. The unit delivers 360W maximum power with an adjustable trim-pot for fine voltage tuning.

Installation and common issues

A voltage selector switch on the chassis must be set to the correct AC input (110V or 220V) before the unit is energised; failure to do so will damage the supply. An auto on/off cooling fan manages thermals, while built-in short-circuit, overload and over-voltage protection (115%-135%) cut off the output and auto-reset. Professional installation by a licensed electrician is highly recommended.

Pre-order checklist

Verify that your load operates at 24V and draws less than 360W; continuous 24/7 operation should not exceed 40% of the full 360W rating. Confirm the ambient temperature stays within -10 to 60 degrees Celsius. Ensure the AC mains available at the install site matches either 110V or 220V so the selector switch can be set correctly.

Přednosti

  • Converts AC 110V/220V to DC 24V 15A 360W
  • Adjustable output voltage from 20.89V to 29.94V via trim-pot
  • Auto-reset protection against short-circuit, overload and over-voltage 115%-135%
  • Cooling fan activates automatically for low-temperature operation
  • Suitable for continuous use up to 40% load at 60°C

Specifikace

TypeAT

Otázky k tomuto produktu

How do I confirm the supply is delivering the correct voltage after installation?

Measure the DC output with a multimeter; out of the box it reads 24.19 V, the trim-pot adjusts down to 20.89 V and up to 29.94 V.

What comes in the box and what must I source separately?

The unit itself is supplied; you must provide an AC mains cord for the 110 V or 220 V input and the DC wiring to your load.

Which input-voltage setting should I select for my region?

Use the external switch to choose 110 V or 220 V AC before powering on, matching your local mains supply.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.