Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse

NEMIX RAM

NEMIX RAM 32GB DDR5 5600 ECC Unbuffered UDIMM CL46 2Rx8 1.1V 288-pin memory upgrade

SKU CH-MZ0P-8TAEK

32 GB DDR5 5600 ECC unbuffered UDIMM with CL46 latency, 2Rx8 organisation and 1.1 V operation

  • Capacity32GB
  • SpeedDDR5 5600 (PC5 44800)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • ECC protection safeguards data integrity for critical workloads
  • 5600 MT/s DDR5 speed accelerates server and workstation tasks
  • 32 GB single-module capacity simplifies high-density upgrades
  • 1 V operating voltage reduces power draw per module
  • 288-pin UDIMM form factor fits compatible DDR5 platforms

32GB DDR5 ECC UDIMM

This 32GB DDR5 5600 ECC unbuffered UDIMM provides error-correcting memory for compatible Micron server and workstation platforms. The single module operates at 1.1V with CL46 latency and a 2Rx8 rank structure. It is designed for systems that require ECC data integrity without registered buffering.

Who this suits and who should look elsewhere

This module suits administrators upgrading Micron-branded servers or workstations that accept 288-pin DDR5 ECC UDIMMs. Builders needing registered RDIMMs, non-ECC memory, lower latency CL values, or capacities other than 32GB per slot should look elsewhere.

PC5-44800 speed rating

The memory runs at DDR5 5600, labelled PC5-44800, which is the single specification that decides whether this part matches the motherboard memory controller. Verify the platform supports this exact data rate before purchase.

Põhijooned

  • ECC protection safeguards data integrity for critical workloads
  • 5600 MT/s DDR5 speed accelerates server and workstation tasks
  • 32 GB single-module capacity simplifies high-density upgrades
  • 1 V operating voltage reduces power draw per module
  • 288-pin UDIMM form factor fits compatible DDR5 platforms

Tehnilised andmed

BrandNEMIX RAM
SeriesMicron Server/Workstaion Compatible Series Memory
ModelMicron DDR5 5600MHZ ECC Unbuffered UDIMM
Part NumberME44800-328K1
Capacity32GB
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemMICRON
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 ECC UDIMM
Rank2Rx8
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (1X32GB) DDR5 5600MHZ PC5-44800 2Rx8 1.1V CL46 288-PIN ECC Unbuffered UDIMM

Küsimused selle toote kohta

Does my motherboard need a DDR5 288-pin UDIMM slot that supports 1.1 V and ECC to use this 32 GB module?

Yes, the board must provide a DDR5 288-pin UDIMM slot, run at 1.1 V and have ECC support enabled in the BIOS for this module to operate.

Can I add this 5600 MT/s CL46 stick to existing DDR5 4800 memory and still boot?

The system will down-clock all modules to the lowest common speed and loosest timings, so the 5600 MT/s stick will run at 4800 MT/s alongside the older memory.

How do I confirm the module is running at 5600 MT/s with ECC active after installation?

Check the BIOS memory information page or a tool such as CPU-Z; it should report 5600 MT/s, CL46 timings and ECC enabled for the installed DIMM.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.