NEMIX RAM
NEMIX RAM 32GB DDR5 5600 ECC Unbuffered UDIMM CL46 2Rx8 1.1V 288-pin memory upgrade
32 GB DDR5 5600 ECC unbuffered UDIMM with CL46 latency, 2Rx8 organisation and 1.1 V operation
- Capacity32GB
- SpeedDDR5 5600 (PC5 44800)
- ECCYes
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- ECC protection safeguards data integrity for critical workloads
- 5600 MT/s DDR5 speed accelerates server and workstation tasks
- 32 GB single-module capacity simplifies high-density upgrades
- 1 V operating voltage reduces power draw per module
- 288-pin UDIMM form factor fits compatible DDR5 platforms
32GB DDR5 ECC UDIMM
This 32GB DDR5 5600 ECC unbuffered UDIMM provides error-correcting memory for compatible Micron server and workstation platforms. The single module operates at 1.1V with CL46 latency and a 2Rx8 rank structure. It is designed for systems that require ECC data integrity without registered buffering.
Who this suits and who should look elsewhere
This module suits administrators upgrading Micron-branded servers or workstations that accept 288-pin DDR5 ECC UDIMMs. Builders needing registered RDIMMs, non-ECC memory, lower latency CL values, or capacities other than 32GB per slot should look elsewhere.
PC5-44800 speed rating
The memory runs at DDR5 5600, labelled PC5-44800, which is the single specification that decides whether this part matches the motherboard memory controller. Verify the platform supports this exact data rate before purchase.
נקודות עיקריות
- ECC protection safeguards data integrity for critical workloads
- 5600 MT/s DDR5 speed accelerates server and workstation tasks
- 32 GB single-module capacity simplifies high-density upgrades
- 1 V operating voltage reduces power draw per module
- 288-pin UDIMM form factor fits compatible DDR5 platforms
מפרט טכני
| Brand | NEMIX RAM |
|---|---|
| Series | Micron Server/Workstaion Compatible Series Memory |
| Model | Micron DDR5 5600MHZ ECC Unbuffered UDIMM |
| Part Number | ME44800-328K1 |
| Capacity | 32GB |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | MICRON |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 ECC UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (1X32GB) DDR5 5600MHZ PC5-44800 2Rx8 1.1V CL46 288-PIN ECC Unbuffered UDIMM |
שאלות על הפריט הזה
Does my motherboard need a DDR5 288-pin UDIMM slot that supports 1.1 V and ECC to use this 32 GB module?
Yes, the board must provide a DDR5 288-pin UDIMM slot, run at 1.1 V and have ECC support enabled in the BIOS for this module to operate.
Can I add this 5600 MT/s CL46 stick to existing DDR5 4800 memory and still boot?
The system will down-clock all modules to the lowest common speed and loosest timings, so the 5600 MT/s stick will run at 4800 MT/s alongside the older memory.
How do I confirm the module is running at 5600 MT/s with ECC active after installation?
Check the BIOS memory information page or a tool such as CPU-Z; it should report 5600 MT/s, CL46 timings and ECC enabled for the installed DIMM.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.



