Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green bare DDR5 UDIMM module with black chips and gold contacts

NEMIX RAM

NEMIX RAM 32GB DDR5 5600 ECC Unbuffered UDIMM CL46 2Rx8 1.1V 288-pin memory upgrade

SKU CH-MZ0P-8TAEK

32 GB DDR5 5600 ECC unbuffered UDIMM with CL46 latency, 2Rx8 organisation and 1.1 V operation

  • Capacity32GB
  • SpeedDDR5 5600 (PC5 44800)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • ECC protection safeguards data integrity for critical workloads
  • 5600 MT/s DDR5 speed accelerates server and workstation tasks
  • 32 GB single-module capacity simplifies high-density upgrades
  • 1 V operating voltage reduces power draw per module
  • 288-pin UDIMM form factor fits compatible DDR5 platforms

32GB DDR5 ECC UDIMM

This 32GB DDR5 5600 ECC unbuffered UDIMM provides error-correcting memory for compatible Micron server and workstation platforms. The single module operates at 1.1V with CL46 latency and a 2Rx8 rank structure. It is designed for systems that require ECC data integrity without registered buffering.

Who this suits and who should look elsewhere

This module suits administrators upgrading Micron-branded servers or workstations that accept 288-pin DDR5 ECC UDIMMs. Builders needing registered RDIMMs, non-ECC memory, lower latency CL values, or capacities other than 32GB per slot should look elsewhere.

PC5-44800 speed rating

The memory runs at DDR5 5600, labelled PC5-44800, which is the single specification that decides whether this part matches the motherboard memory controller. Verify the platform supports this exact data rate before purchase.

Přednosti

  • ECC protection safeguards data integrity for critical workloads
  • 5600 MT/s DDR5 speed accelerates server and workstation tasks
  • 32 GB single-module capacity simplifies high-density upgrades
  • 1 V operating voltage reduces power draw per module
  • 288-pin UDIMM form factor fits compatible DDR5 platforms

Specifikace

BrandNEMIX RAM
SeriesMicron Server/Workstaion Compatible Series Memory
ModelMicron DDR5 5600MHZ ECC Unbuffered UDIMM
Part NumberME44800-328K1
Capacity32GB
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemMICRON
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 ECC UDIMM
Rank2Rx8
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (1X32GB) DDR5 5600MHZ PC5-44800 2Rx8 1.1V CL46 288-PIN ECC Unbuffered UDIMM

Otázky k tomuto produktu

Does my motherboard need a DDR5 288-pin UDIMM slot that supports 1.1 V and ECC to use this 32 GB module?

Yes, the board must provide a DDR5 288-pin UDIMM slot, run at 1.1 V and have ECC support enabled in the BIOS for this module to operate.

Can I add this 5600 MT/s CL46 stick to existing DDR5 4800 memory and still boot?

The system will down-clock all modules to the lowest common speed and loosest timings, so the 5600 MT/s stick will run at 4800 MT/s alongside the older memory.

How do I confirm the module is running at 5600 MT/s with ECC active after installation?

Check the BIOS memory information page or a tool such as CPU-Z; it should report 5600 MT/s, CL46 timings and ECC enabled for the installed DIMM.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.