BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278589BTC
Laos
NEMIX RAM
NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX PS-3615Q memory upgrade
Adds 4 GB of DDR3 1333 MHz SODIMM memory to a POSIFLEX PS-3615Q terminal for faster point-of-sale performance
- Capacity4GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- Designed for POSIFLEX PS-3615Q terminal
- DDR3 1333 speed boosts transaction processing
- Low 1.35V voltage reduces power draw
- 204-pin SODIMM fits fanless POS chassis
- Major OEM chips ensure reliable operation
POS Terminal Memory Upgrade
This 4 GB DDR3 SODIMM is built for the POSIFLEX PS-3615Q fanless point-of-sale terminal. It targets retailers and integrators who need a direct, compatible module to refresh or expand the memory in that specific platform.
4 GB PC3-10600 Capacity and Limits
The single 2Rx8 module runs at 1333 MHz with CL9 latency and 1.35 V operation. Four gigabytes covers typical POS workloads and light multitasking; it will not satisfy systems that require larger memory footprints or higher bandwidth for demanding applications.
204-Pin Unbuffered Non-ECC Build
The stick uses major-brand Samsung, Micron or Hynix chips on a standard 204-pin SODIMM PCB without a heat spreader. Unbuffered, non-ECC design suits the POS motherboard slot directly; no extra mounting hardware or cooling clearance is needed for installation.
Põhijooned
- Designed for POSIFLEX PS-3615Q terminal
- DDR3 1333 speed boosts transaction processing
- Low 1.35V voltage reduces power draw
- 204-pin SODIMM fits fanless POS chassis
- Major OEM chips ensure reliable operation
Tehnilised andmed
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-428K1 |
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Küsimused selle toote kohta
Will this 204-pin DDR3 SODIMM work alongside the existing memory in my POSIFLEX PS-3615Q terminal?
The module is built to POSIFLEX POS Series specifications, matching the DDR3 1333 PC3-10600 speed and 1.35 V voltage used by the PS-3615Q, so it will run in step with any factory-installed SODIMM of the same rating.
How can I confirm the new RAM is recognised and running at CL9 1333 MHz after installation?
Enter the system BIOS or use a hardware-info utility; the memory should report 4 GB capacity, DDR3-1333 frequency, CL9 timings and 1.50 V operating voltage.
Does the package include only the SODIMM or are tools and thermal pads supplied as well?
The box contains the single 4 GB 204-pin SODIMM (part MS10600-428K1) and nothing else; no screwdriver, heat spreader or additional components are included.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
