Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board SODIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX PS-3615Q memory upgrade

SKU CH-VY5A-X70K3

Adds 4 GB of DDR3 1333 MHz SODIMM memory to a POSIFLEX PS-3615Q terminal for faster point-of-sale performance

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX PS-3615Q terminal
  • DDR3 1333 speed boosts transaction processing
  • Low 1.35V voltage reduces power draw
  • 204-pin SODIMM fits fanless POS chassis
  • Major OEM chips ensure reliable operation

POS Terminal Memory Upgrade

This 4 GB DDR3 SODIMM is built for the POSIFLEX PS-3615Q fanless point-of-sale terminal. It targets retailers and integrators who need a direct, compatible module to refresh or expand the memory in that specific platform.

4 GB PC3-10600 Capacity and Limits

The single 2Rx8 module runs at 1333 MHz with CL9 latency and 1.35 V operation. Four gigabytes covers typical POS workloads and light multitasking; it will not satisfy systems that require larger memory footprints or higher bandwidth for demanding applications.

204-Pin Unbuffered Non-ECC Build

The stick uses major-brand Samsung, Micron or Hynix chips on a standard 204-pin SODIMM PCB without a heat spreader. Unbuffered, non-ECC design suits the POS motherboard slot directly; no extra mounting hardware or cooling clearance is needed for installation.

Kohokohdat

  • Designed for POSIFLEX PS-3615Q terminal
  • DDR3 1333 speed boosts transaction processing
  • Low 1.35V voltage reduces power draw
  • 204-pin SODIMM fits fanless POS chassis
  • Major OEM chips ensure reliable operation

Tekniset tiedot

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Kysymyksiä tästä tuotteesta

Will this 204-pin DDR3 SODIMM work alongside the existing memory in my POSIFLEX PS-3615Q terminal?

The module is built to POSIFLEX POS Series specifications, matching the DDR3 1333 PC3-10600 speed and 1.35 V voltage used by the PS-3615Q, so it will run in step with any factory-installed SODIMM of the same rating.

How can I confirm the new RAM is recognised and running at CL9 1333 MHz after installation?

Enter the system BIOS or use a hardware-info utility; the memory should report 4 GB capacity, DDR3-1333 frequency, CL9 timings and 1.50 V operating voltage.

Does the package include only the SODIMM or are tools and thermal pads supplied as well?

The box contains the single 4 GB 204-pin SODIMM (part MS10600-428K1) and nothing else; no screwdriver, heat spreader or additional components are included.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.