暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board SODIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX PS-3615Q memory upgrade

SKU CH-VY5A-X70K3

Adds 4 GB of DDR3 1333 MHz SODIMM memory to a POSIFLEX PS-3615Q terminal for faster point-of-sale performance

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX PS-3615Q terminal
  • DDR3 1333 speed boosts transaction processing
  • Low 1.35V voltage reduces power draw
  • 204-pin SODIMM fits fanless POS chassis
  • Major OEM chips ensure reliable operation

POS Terminal Memory Upgrade

This 4 GB DDR3 SODIMM is built for the POSIFLEX PS-3615Q fanless point-of-sale terminal. It targets retailers and integrators who need a direct, compatible module to refresh or expand the memory in that specific platform.

4 GB PC3-10600 Capacity and Limits

The single 2Rx8 module runs at 1333 MHz with CL9 latency and 1.35 V operation. Four gigabytes covers typical POS workloads and light multitasking; it will not satisfy systems that require larger memory footprints or higher bandwidth for demanding applications.

204-Pin Unbuffered Non-ECC Build

The stick uses major-brand Samsung, Micron or Hynix chips on a standard 204-pin SODIMM PCB without a heat spreader. Unbuffered, non-ECC design suits the POS motherboard slot directly; no extra mounting hardware or cooling clearance is needed for installation.

特長

  • Designed for POSIFLEX PS-3615Q terminal
  • DDR3 1333 speed boosts transaction processing
  • Low 1.35V voltage reduces power draw
  • 204-pin SODIMM fits fanless POS chassis
  • Major OEM chips ensure reliable operation

仕様

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

この商品に関する質問

Will this 204-pin DDR3 SODIMM work alongside the existing memory in my POSIFLEX PS-3615Q terminal?

The module is built to POSIFLEX POS Series specifications, matching the DDR3 1333 PC3-10600 speed and 1.35 V voltage used by the PS-3615Q, so it will run in step with any factory-installed SODIMM of the same rating.

How can I confirm the new RAM is recognised and running at CL9 1333 MHz after installation?

Enter the system BIOS or use a hardware-info utility; the memory should report 4 GB capacity, DDR3-1333 frequency, CL9 timings and 1.50 V operating voltage.

Does the package include only the SODIMM or are tools and thermal pads supplied as well?

The box contains the single 4 GB 204-pin SODIMM (part MS10600-428K1) and nothing else; no screwdriver, heat spreader or additional components are included.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。