BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278531BTC
Laos
NEMIX RAM
NEMIX RAM 4GB DDR3 1333 PC3-10600 2Rx8 1.35V 204-Pin SODIMM POSIFLEX KS-7415G memory upgrade
4 GB DDR3 SODIMM running at 1333 MHz for the POSIFLEX KS-7415G point-of-sale terminal
- Capacity4GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- Designed for POSIFLEX KS-7415G terminal compatibility
- 4GB DDR3 1333MHz boosts system responsiveness
- Low 1.35V voltage reduces power consumption
- 2Rx8 dual-rank architecture optimises memory bandwidth
- Rigorously stress-tested for mission-critical reliability
System-specific DDR3 upgrade
This 4 GB DDR3 SODIMM is built for the POSIFLEX KS-7415G terminal and matches the factory memory specification. It installs in the single 204-pin slot without any configuration changes.
Sustained workload stability
Modules are stress-tested under continuous load to verify reliable operation in fanless point-of-sale environments. The 1.50 V rating and CL9 latency maintain consistent throughput during long transaction periods.
Unbuffered non-ECC module
The 2Rx8 organisation uses major OEM chips from Samsung, Micron or Hynix on a low-profile green PCB with no heat spreader. The 1.35 V operating voltage keeps power draw low for the sealed chassis.
Põhijooned
- Designed for POSIFLEX KS-7415G terminal compatibility
- 4GB DDR3 1333MHz boosts system responsiveness
- Low 1.35V voltage reduces power consumption
- 2Rx8 dual-rank architecture optimises memory bandwidth
- Rigorously stress-tested for mission-critical reliability
Tehnilised andmed
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-428K1 |
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Küsimused selle toote kohta
Does the 1.35 V DDR3 SODIMM run cooler than a standard 1.5 V module in a fanless POS terminal?
The module is rated at 1.35 V, which is lower than the 1.50 V standard for DDR3, so it draws less power and generates less heat inside the fanless POSIFLEX KS-7415G chassis.
Must the POSIFLEX KS-7415G already have a free 204-pin SODIMM slot to accept this upgrade?
Yes, the 204-pin DDR3 SODIMM plugs directly into an available SO-DIMM socket on the POSIFLEX KS-7415G motherboard; no adapter or extra hardware is required.
Will this PC3-10600 CL9 module work alongside the original memory already installed in the KS-7415G?
The module runs at DDR3 1333 with CL9 timing; if the existing memory matches that speed and latency, the system will operate in dual-channel mode, otherwise it will downclock to the slowest installed stick.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
