Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Green circuit board with black memory chips, 204-pin SODIMM form factor

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 2Rx8 1.35V 204-Pin SODIMM POSIFLEX KS-7415G memory upgrade

SKU CH-H3QE-FWSCY

4 GB DDR3 SODIMM running at 1333 MHz for the POSIFLEX KS-7415G point-of-sale terminal

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX KS-7415G terminal compatibility
  • 4GB DDR3 1333MHz boosts system responsiveness
  • Low 1.35V voltage reduces power consumption
  • 2Rx8 dual-rank architecture optimises memory bandwidth
  • Rigorously stress-tested for mission-critical reliability

System-specific DDR3 upgrade

This 4 GB DDR3 SODIMM is built for the POSIFLEX KS-7415G terminal and matches the factory memory specification. It installs in the single 204-pin slot without any configuration changes.

Sustained workload stability

Modules are stress-tested under continuous load to verify reliable operation in fanless point-of-sale environments. The 1.50 V rating and CL9 latency maintain consistent throughput during long transaction periods.

Unbuffered non-ECC module

The 2Rx8 organisation uses major OEM chips from Samsung, Micron or Hynix on a low-profile green PCB with no heat spreader. The 1.35 V operating voltage keeps power draw low for the sealed chassis.

Najważniejsze cechy

  • Designed for POSIFLEX KS-7415G terminal compatibility
  • 4GB DDR3 1333MHz boosts system responsiveness
  • Low 1.35V voltage reduces power consumption
  • 2Rx8 dual-rank architecture optimises memory bandwidth
  • Rigorously stress-tested for mission-critical reliability

Specyfikacja

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Pytania dotyczące tego produktu

Does the 1.35 V DDR3 SODIMM run cooler than a standard 1.5 V module in a fanless POS terminal?

The module is rated at 1.35 V, which is lower than the 1.50 V standard for DDR3, so it draws less power and generates less heat inside the fanless POSIFLEX KS-7415G chassis.

Must the POSIFLEX KS-7415G already have a free 204-pin SODIMM slot to accept this upgrade?

Yes, the 204-pin DDR3 SODIMM plugs directly into an available SO-DIMM socket on the POSIFLEX KS-7415G motherboard; no adapter or extra hardware is required.

Will this PC3-10600 CL9 module work alongside the original memory already installed in the KS-7415G?

The module runs at DDR3 1333 with CL9 timing; if the existing memory matches that speed and latency, the system will operate in dual-channel mode, otherwise it will downclock to the slowest installed stick.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.