Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board with black memory chips, 204-pin SODIMM form factor

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 2Rx8 1.35V 204-Pin SODIMM POSIFLEX KS-7415G memory upgrade

SKU CH-H3QE-FWSCY

4 GB DDR3 SODIMM running at 1333 MHz for the POSIFLEX KS-7415G point-of-sale terminal

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX KS-7415G terminal compatibility
  • 4GB DDR3 1333MHz boosts system responsiveness
  • Low 1.35V voltage reduces power consumption
  • 2Rx8 dual-rank architecture optimises memory bandwidth
  • Rigorously stress-tested for mission-critical reliability

System-specific DDR3 upgrade

This 4 GB DDR3 SODIMM is built for the POSIFLEX KS-7415G terminal and matches the factory memory specification. It installs in the single 204-pin slot without any configuration changes.

Sustained workload stability

Modules are stress-tested under continuous load to verify reliable operation in fanless point-of-sale environments. The 1.50 V rating and CL9 latency maintain consistent throughput during long transaction periods.

Unbuffered non-ECC module

The 2Rx8 organisation uses major OEM chips from Samsung, Micron or Hynix on a low-profile green PCB with no heat spreader. The 1.35 V operating voltage keeps power draw low for the sealed chassis.

Pluspunten

  • Designed for POSIFLEX KS-7415G terminal compatibility
  • 4GB DDR3 1333MHz boosts system responsiveness
  • Low 1.35V voltage reduces power consumption
  • 2Rx8 dual-rank architecture optimises memory bandwidth
  • Rigorously stress-tested for mission-critical reliability

Specificaties

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Vragen over dit artikel

Does the 1.35 V DDR3 SODIMM run cooler than a standard 1.5 V module in a fanless POS terminal?

The module is rated at 1.35 V, which is lower than the 1.50 V standard for DDR3, so it draws less power and generates less heat inside the fanless POSIFLEX KS-7415G chassis.

Must the POSIFLEX KS-7415G already have a free 204-pin SODIMM slot to accept this upgrade?

Yes, the 204-pin DDR3 SODIMM plugs directly into an available SO-DIMM socket on the POSIFLEX KS-7415G motherboard; no adapter or extra hardware is required.

Will this PC3-10600 CL9 module work alongside the original memory already installed in the KS-7415G?

The module runs at DDR3 1333 with CL9 timing; if the existing memory matches that speed and latency, the system will operate in dual-channel mode, otherwise it will downclock to the slowest installed stick.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.