Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse

NEMIX RAM

NEMIX RAM MD44800-818K1 8GB DDR5 5600 CL46 1Rx8 UDIMM memory upgrade

SKU CH-6T7X-TGGFJ

An 8 GB DDR5 desktop module running at 5600 MHz with CL46 latency, 1.1 V operation and 288-pin UDIMM form factor, validated for the Supermicro X14SAZ-TLN4F motherboard

  • Capacity8GB
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo
  • Full-speed 5600 MHz DDR5 performance
  • Exact fit for Supermicro X14SAZ-TLN4F motherboard
  • Stable 1.1 V operation with CL46 latency
  • Major OEM chips tested at rated speed
  • 8 GB 288-pin UDIMM ready to install

Exact DDR5-5600 upgrade for Supermicro X14SAZ-TLN4F

This 8GB DDR5 module runs at 5600 MT/s with CL46 timing at 1.10 V. It uses a 1Rx8 unbuffered UDIMM layout on a 288-pin connector and contains no heat spreader. The part is built with major OEM chips and validated for the Supermicro X14SAZ-TLN4F motherboard so the memory controller recognises the full capacity at rated speed.

Verify board manual for population rules

Before ordering check the motherboard manual for supported DIMM population order maximum capacity per slot and any BIOS version requirements. The module is non-ECC and unbuffered so it will not work in slots that require registered or ECC memory. Confirm the board accepts 1Rx8 DDR5 UDIMMs at 1.10 V to avoid a module that does not post.

Stable operation at rated JEDEC settings under load

The module operates at its JEDEC standard 5600 MT/s CL46 1.10 V without overclocking headroom. Major OEM chips are tested for stability at these specifications during sustained workloads. No heat spreader is fitted so adequate case airflow is needed to maintain rated performance over long sessions.

Põhijooned

  • Full-speed 5600 MHz DDR5 performance
  • Exact fit for Supermicro X14SAZ-TLN4F motherboard
  • Stable 1.1 V operation with CL46 latency
  • Major OEM chips tested at rated speed
  • 8 GB 288-pin UDIMM ready to install

Tehnilised andmed

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-818K1
Capacity8GB
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Selle mudeli teised versioonid

5 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

Does the MD44800-818K1 kit include anything besides the 8 GB DDR5 5600 module?

The package contains a single 8 GB DDR5 5600 CL46 1Rx8 1.1 V 288-pin UDIMM; no heat spreader, cables, tools or extra modules are included.

Should I choose this 8 GB 5600 CL46 stick or look for a different capacity or speed for the Supermicro X14SAZ-TLN4F?

This exact part number matches the board's validated DDR5 5600 PC5-44800 1Rx8 1.1 V CL46 specification; other capacities or timings are not verified for this motherboard.

Will the CL46 latency at 5600 MT/s deliver the rated bandwidth once installed in the X14SAZ-TLN4F?

Yes, the module is tested at DDR5 5600 (PC5-44800) with CL46 1.1 V 1Rx8 timing, so the memory controller will recognise it at full rated speed and latency.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.