NEMIX RAM MD44800-818K1 8GB DDR5 5600 CL46 1Rx8 UDIMM memory upgrade

Exact DDR5-5600 upgrade for Supermicro X14SAZ-TLN4F

This 8GB DDR5 module runs at 5600 MT/s with CL46 timing at 1.10 V. It uses a 1Rx8 unbuffered UDIMM layout on a 288-pin connector and contains no heat spreader. The part is built with major OEM chips and validated for the Supermicro X14SAZ-TLN4F motherboard so the memory controller recognises the full capacity at rated speed.

Verify board manual for population rules

Before ordering check the motherboard manual for supported DIMM population order maximum capacity per slot and any BIOS version requirements. The module is non-ECC and unbuffered so it will not work in slots that require registered or ECC memory. Confirm the board accepts 1Rx8 DDR5 UDIMMs at 1.10 V to avoid a module that does not post.

Stable operation at rated JEDEC settings under load

The module operates at its JEDEC standard 5600 MT/s CL46 1.10 V without overclocking headroom. Major OEM chips are tested for stability at these specifications during sustained workloads. No heat spreader is fitted so adequate case airflow is needed to maintain rated performance over long sessions.