We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM MD44800-818K1 8GB DDR5 5600 CL46 1Rx8 UDIMM memory upgrade

SKU CH-6T7X-TGGFJ

An 8 GB DDR5 desktop module running at 5600 MHz with CL46 latency, 1.1 V operation and 288-pin UDIMM form factor, validated for the Supermicro X14SAZ-TLN4F motherboard

  • Capacity8GB
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 8GB

  • Full-speed 5600 MHz DDR5 performance
  • Exact fit for Supermicro X14SAZ-TLN4F motherboard
  • Stable 1.1 V operation with CL46 latency
  • Major OEM chips tested at rated speed
  • 8 GB 288-pin UDIMM ready to install

Exact DDR5-5600 upgrade for Supermicro X14SAZ-TLN4F

This 8GB DDR5 module runs at 5600 MT/s with CL46 timing at 1.10 V. It uses a 1Rx8 unbuffered UDIMM layout on a 288-pin connector and contains no heat spreader. The part is built with major OEM chips and validated for the Supermicro X14SAZ-TLN4F motherboard so the memory controller recognises the full capacity at rated speed.

Verify board manual for population rules

Before ordering check the motherboard manual for supported DIMM population order maximum capacity per slot and any BIOS version requirements. The module is non-ECC and unbuffered so it will not work in slots that require registered or ECC memory. Confirm the board accepts 1Rx8 DDR5 UDIMMs at 1.10 V to avoid a module that does not post.

Stable operation at rated JEDEC settings under load

The module operates at its JEDEC standard 5600 MT/s CL46 1.10 V without overclocking headroom. Major OEM chips are tested for stability at these specifications during sustained workloads. No heat spreader is fitted so adequate case airflow is needed to maintain rated performance over long sessions.

Highlights

  • Full-speed 5600 MHz DDR5 performance
  • Exact fit for Supermicro X14SAZ-TLN4F motherboard
  • Stable 1.1 V operation with CL46 latency
  • Major OEM chips tested at rated speed
  • 8 GB 288-pin UDIMM ready to install

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-818K1
Capacity8GB
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the MD44800-818K1 kit include anything besides the 8 GB DDR5 5600 module?

The package contains a single 8 GB DDR5 5600 CL46 1Rx8 1.1 V 288-pin UDIMM; no heat spreader, cables, tools or extra modules are included.

Should I choose this 8 GB 5600 CL46 stick or look for a different capacity or speed for the Supermicro X14SAZ-TLN4F?

This exact part number matches the board's validated DDR5 5600 PC5-44800 1Rx8 1.1 V CL46 specification; other capacities or timings are not verified for this motherboard.

Will the CL46 latency at 5600 MT/s deliver the rated bandwidth once installed in the X14SAZ-TLN4F?

Yes, the module is tested at DDR5 5600 (PC5-44800) with CL46 1.1 V 1Rx8 timing, so the memory controller will recognise it at full rated speed and latency.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.