We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green circuit boards with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 4800 CL40 1.1V 288-pin UDIMM memory upgrade

SKU CH-12FG-WKHSK

A 32 GB DDR5 kit with two 16 GB unbuffered UDIMMs running at 4800 MT/s, CL40 and 1.1 V, validated for the Supermicro X14SAE motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCNo

Size 32GB 2X16GB

  • 32 GB kit delivers full-capacity DDR5 performance
  • DDR5-4800 CL40 timing matches controller expectations
  • 1 V operation reduces power draw
  • 288-pin UDIMM form factor fits Supermicro X14SAE
  • Major OEM chips tested for rated-speed stability

NEMIX RAM 32GB DDR5 kit for Supermicro X14SAE

This 32GB kit contains two 16GB DDR5 UDIMM modules rated at 4800MHz PC5-38400 with CL40 timing and 1.10V operation. It is built with major OEM chips from Samsung, Micron or Hynix and tested for stability at the rated speed. The kit targets desktop PC memory upgrades where the motherboard requires exactly this specification.

Non-ECC unbuffered DDR5 for specific Supermicro

The module is a Non-ECC 1Rx8 unbuffered UDIMM, matching the Supermicro X14SAE motherboard's memory population rules. Builders who need ECC registered DIMMs, SODIMM form factor, or a different speed and voltage combination should look at other parts.

288-pin DDR5 UDIMM with CL40 at 1.10V

The single specification that decides fit is the 288-pin DDR5 UDIMM interface combined with CL40 latency at 1.10V; only boards that accept this exact electrical and mechanical profile will recognise the kit at full capacity and rated speed.

Highlights

  • 32 GB kit delivers full-capacity DDR5 performance
  • DDR5-4800 CL40 timing matches controller expectations
  • 1 V operation reduces power draw
  • 288-pin UDIMM form factor fits Supermicro X14SAE
  • Major OEM chips tested for rated-speed stability

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD38400-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much power do the 1.1V DDR5 modules draw when the system runs all day?

Each module operates at 1.10V, the standard DDR5 voltage, so total power draw stays within the motherboard's rated DIMM-slot limits for continuous operation.

What motherboard slot and chipset support must I already have for this 288-pin UDIMM kit to work?

You need a desktop board with 288-pin DDR5 UDIMM slots and a memory controller that accepts 4800 MT/s, 1Rx8, non-ECC, unbuffered modules at 1.10V.

Will the CL40 1Rx8 modules run stably alongside older DDR5 DIMMs I keep installed?

Mixing ranks, speeds or latencies can force the controller to down-clock all slots; for guaranteed stability at 4800 MT/s CL40, populate every slot with identical 1Rx8 modules.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.