We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips, no heat spreader, 288 gold pins along the bottom edge

NEMIX RAM

NEMIX RAM 48GB DDR5 5600MHz CL46 2Rx8 1.1V 288-Pin UDIMM for NZXT N7 B850 memory upgrade

SKU CH-PB68-ZH5VN

48GB DDR5 5600MHz CL46 2Rx8 UDIMM validated for the NZXT N7 B850 motherboard

  • Capacity48GB
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 48GB

  • Exact-match 48GB DDR5-5600 CL46 1.1V 2Rx8 UDIMM recognised at full speed
  • Verified fit for NZXT N7 B850 motherboard with 288-pin unbuffered form factor
  • Built with major OEM chips from Samsung Micron Hynix tested for stability
  • 48GB capacity boosts multitasking and overall system responsiveness
  • Lifetime replacement warranty with free US-based technical support

48GB DDR5 5600MHz NZXT N7 B850 upgrade

This 48GB DDR5 5600MHz kit is built as an exact-match upgrade for the NZXT N7 B850 motherboard. It delivers the precise rank, voltage, and timing the board's memory controller expects for full-capacity recognition at rated speed. The 2Rx8 non-ECC unbuffered design suits desktop workloads from content creation to multitasking. Builders needing ECC or registered modules should look elsewhere.

288-pin UDIMM 1.10V CL46 no heat spreader

The 288-pin UDIMM form factor matches the NZXT N7 B850 slot requirements without adapter or converter. Major OEM chips from Samsung, Micron, or Hynix are tested at 1.10V and CL46 for stability at the specified data rate. Absence of a heat spreader keeps the module low-profile for tight cooler clearances. Systems requiring taller modules or active cooling on the DIMM will not be served by this design.

DDR5 5600MHz PC5-44800 capacity and speed step

Replacing slower DDR5 or lower-capacity kits with this PC5-44800 module raises both bandwidth and total memory headroom in a single step. The jump is worthwhile when the board's population rules allow the 48GB density and the workload benefits from the higher transfer rate. Builders constrained to lower speeds or smaller DIMM counts by their specific motherboard revision will not gain the full uplift.

Highlights

  • Exact-match 48GB DDR5-5600 CL46 1.1V 2Rx8 UDIMM recognised at full speed
  • Verified fit for NZXT N7 B850 motherboard with 288-pin unbuffered form factor
  • Built with major OEM chips from Samsung Micron Hynix tested for stability
  • 48GB capacity boosts multitasking and overall system responsiveness
  • Lifetime replacement warranty with free US-based technical support

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-4828K1
Capacity48GB
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemNZXT
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What DDR5 speed and PC5 bandwidth does this 48GB kit run at?

This kit operates at DDR5 5600, which is the PC5-44800 standard. The memory controller on the NZXT N7 B850 will recognise the 2Rx8 modules and run them at the rated 5600 MT/s without manual tuning.

Will the 288-pin UDIMM modules fit the NZXT N7 B850 motherboard slots?

Yes. The board uses standard 288-pin DDR5 UDIMM slots, and these modules are the exact unbuffered non-ECC form factor the manual specifies. No heat spreader means they clear most CPU coolers without height issues.

How do I install the kit so the board sees the full 48GB?

Power off, open the case, and insert the module into the primary slot indicated in the NZXT N7 B850 manual — usually the slot nearest the CPU. Press down until both retention clips click. A common mistake is seating only one side; verify both clips are locked before closing the case.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.