Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Silver aluminum M.2 SATA enclosure with USB-C and USB-A cable

Orico

Orico M.2 SATA SSD Enclosure Aluminum USB 3.2 Gen2 2-in-1 Cable Silver

SKU CH-XWY1-W6WYT

Aluminum enclosure turns an M.2 SATA SSD into a portable USB 3.2 Gen2 drive with a 2-in-1 cable

  • ColorSilver
  • TypeEnclosure
  • MaterialAluminum
  • External InterfaceUSB Type C
  • HDD Count SupportedSingle SSD
  • Number of Bay1 Bay

Color Silver

Size M.2 NGFF SSD

Model USB 3.2 Gen2 (6Gbps)

  • Turn any M.2 SATA SSD into a fast portable drive with 550 MB/s speeds
  • Aluminium body with CNC-cut fins and a wrap-around cooling vest keeps the drive cool
  • Supports B-Key and B+M Key SSDs in 2230, 2242, 2260 and 2280 sizes
  • Included 2-in-1 cable gives USB-C and USB-A connections at 10 Gbps
  • USB 3.2 Gen2 interface delivers up to 1000 MB/s theoretical bandwidth

Portable SSD enclosure for SATA drives

The Orico M.2 SATA enclosure converts a single B-key or B+M-key SATA SSD into a USB-C external drive. It accepts 2230, 2242, 2260 and 2280 form factors and ships with a detachable 2-in-1 cable offering both USB-C and USB-A plugs. The all-aluminium body acts as a heatsink for the installed drive.

SATA-only protocol limits throughput

This adapter works exclusively with M.2 SATA SSDs; it does not support NVMe or PCIe drives. The internal SATA interface tops out at 6 Gbps, so sequential reads and writes cannot exceed 550 MB/s regardless of the 10 Gbps USB cable. Buyers with NVMe modules must choose a different enclosure.

Aluminium chassis sustains write speeds

The CNC-cut aluminium shell wraps the SSD on all sides, conducting heat away during long transfers. Without active cooling, thermal throttling on sustained writes is reduced compared with plastic enclosures. The drive remains at a stable temperature during extended backup or cloning sessions.

Põhijooned

  • Turn any M.2 SATA SSD into a fast portable drive with 550 MB/s speeds
  • Aluminium body with CNC-cut fins and a wrap-around cooling vest keeps the drive cool
  • Supports B-Key and B+M Key SSDs in 2230, 2242, 2260 and 2280 sizes
  • Included 2-in-1 cable gives USB-C and USB-A connections at 10 Gbps
  • USB 3.2 Gen2 interface delivers up to 1000 MB/s theoretical bandwidth

Tehnilised andmed

ColorSilver
TypeEnclosure
MaterialAluminum
External InterfaceUSB Type C
HDD Count SupportedSingle SSD
Number of Bay1 Bay

Selle mudeli teised versioonid

5 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

What real-world speed will I see from the 550 MB/s headline figure when the enclosure is in use?

The 550 MB/s figure is the theoretical maximum for a SATA SSD over the 6 Gbps link; actual throughput depends on the drive you install and the host port you connect to.

Which USB standard does the 2-in-1 cable use, and what throughput does it cap at?

The cable provides USB 3.2 Gen 2 Type-C to Type-A and Type-C to Type-C connections, each rated at 10 Gbps.

What physical SSD sizes and key types fit inside this aluminum enclosure?

It accepts M.2 SATA drives with B-key or B+M-key notches in 2230, 2242, 2260 and 2280 form factors.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.