Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Silver aluminum M.2 SATA enclosure with USB-C and USB-A cable

Orico

Orico M.2 SATA SSD Enclosure Aluminum USB 3.2 Gen2 2-in-1 Cable Silver

SKU CH-XWY1-W6WYT

Aluminum enclosure turns an M.2 SATA SSD into a portable USB 3.2 Gen2 drive with a 2-in-1 cable

  • ColorSilver
  • TypeEnclosure
  • MaterialAluminum
  • External InterfaceUSB Type C
  • HDD Count SupportedSingle SSD
  • Number of Bay1 Bay

Color Silver

Size M.2 NGFF SSD

Model USB 3.2 Gen2 (6Gbps)

  • Turn any M.2 SATA SSD into a fast portable drive with 550 MB/s speeds
  • Aluminium body with CNC-cut fins and a wrap-around cooling vest keeps the drive cool
  • Supports B-Key and B+M Key SSDs in 2230, 2242, 2260 and 2280 sizes
  • Included 2-in-1 cable gives USB-C and USB-A connections at 10 Gbps
  • USB 3.2 Gen2 interface delivers up to 1000 MB/s theoretical bandwidth

Portable SSD enclosure for SATA drives

The Orico M.2 SATA enclosure converts a single B-key or B+M-key SATA SSD into a USB-C external drive. It accepts 2230, 2242, 2260 and 2280 form factors and ships with a detachable 2-in-1 cable offering both USB-C and USB-A plugs. The all-aluminium body acts as a heatsink for the installed drive.

SATA-only protocol limits throughput

This adapter works exclusively with M.2 SATA SSDs; it does not support NVMe or PCIe drives. The internal SATA interface tops out at 6 Gbps, so sequential reads and writes cannot exceed 550 MB/s regardless of the 10 Gbps USB cable. Buyers with NVMe modules must choose a different enclosure.

Aluminium chassis sustains write speeds

The CNC-cut aluminium shell wraps the SSD on all sides, conducting heat away during long transfers. Without active cooling, thermal throttling on sustained writes is reduced compared with plastic enclosures. The drive remains at a stable temperature during extended backup or cloning sessions.

Přednosti

  • Turn any M.2 SATA SSD into a fast portable drive with 550 MB/s speeds
  • Aluminium body with CNC-cut fins and a wrap-around cooling vest keeps the drive cool
  • Supports B-Key and B+M Key SSDs in 2230, 2242, 2260 and 2280 sizes
  • Included 2-in-1 cable gives USB-C and USB-A connections at 10 Gbps
  • USB 3.2 Gen2 interface delivers up to 1000 MB/s theoretical bandwidth

Specifikace

ColorSilver
TypeEnclosure
MaterialAluminum
External InterfaceUSB Type C
HDD Count SupportedSingle SSD
Number of Bay1 Bay

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What real-world speed will I see from the 550 MB/s headline figure when the enclosure is in use?

The 550 MB/s figure is the theoretical maximum for a SATA SSD over the 6 Gbps link; actual throughput depends on the drive you install and the host port you connect to.

Which USB standard does the 2-in-1 cable use, and what throughput does it cap at?

The cable provides USB 3.2 Gen 2 Type-C to Type-A and Type-C to Type-C connections, each rated at 10 Gbps.

What physical SSD sizes and key types fit inside this aluminum enclosure?

It accepts M.2 SATA drives with B-key or B+M-key notches in 2230, 2242, 2260 and 2280 form factors.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.