Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Green rectangular circuit board with gold edge connectors and black memory chips on both sides

OWC

OWC 16GB DDR4 2400MHz ECC Registered RDIMM 2R4D42R816GB memory upgrade

SKU CH-CTMR-7D9HP

16GB DDR4 2400MHz ECC registered RDIMM for select Supermicro server motherboards

  • Capacity16GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCYes
  • ECC registered design protects data integrity in servers
  • 2400 MHz DDR4 speed matches PC4-19200 specification
  • 16 GB capacity extends memory for virtualised workloads
  • Validated for five Supermicro X11SD motherboard models
  • 2 V operation reduces power draw per module

Server-grade ECC RDIMM upgrade

This 16GB DDR4 2400MHz module is built for Supermicro X11SDV and X11SDW motherboards. Registered ECC design corrects single-bit errors and buffers address lines for stable operation in multi-slot server and workstation configurations. It will not work in standard desktop boards or alongside unbuffered memory.

Sustained data integrity under load

ECC circuitry detects and corrects errors continuously during long compute runs, preventing silent data corruption in databases, virtualisation hosts and NAS workloads. Registered signalling reduces electrical load on the memory controller, allowing larger populations of DIMMs to run at the rated 2400MHz CL17 without timing degradation.

Low-voltage thermal profile

Operating at 1.2V, each module draws minimal power and generates little heat even when all channels are populated. No heat spreader is fitted, relying on chassis airflow for cooling; the registered buffer and ECC logic add negligible thermal load compared with unbuffered equivalents.

Põhijooned

  • ECC registered design protects data integrity in servers
  • 2400 MHz DDR4 speed matches PC4-19200 specification
  • 16 GB capacity extends memory for virtualised workloads
  • Validated for five Supermicro X11SD motherboard models
  • 2 V operation reduces power draw per module

Tehnilised andmed

BrandOWC
Part Number2R4D42R816GB
Capacity16GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X11SDV-12C-TP8F
Supermicro Motherboard X11SDV-16C+-TLN2F
Supermicro Motherboard X11SDV-16C-TLN2F
Supermicro Motherboard X11SDV-16C-TP8F
Supermicro Motherboard X11SDW-12C-TP13F

Selle mudeli teised versioonid

5 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

How much power does the 1.2 V DDR4 2400 MHz ECC RDIMM draw when the server runs all day?

Each module operates at 1.2 V, the standard DDR4 voltage, so power draw stays low even under continuous load.

What motherboard slot and chipset must I already have for this 288-pin registered DIMM to work?

You need a Supermicro X11SDV or X11SDW board with DDR4 RDIMM slots that support ECC registered memory.

Can I add this 2Rx8 CL17 module alongside the existing Supermicro MEMDR416LCL06ER24 sticks in my X11SDV-16C-TLN2F?

Yes, it replaces those part numbers directly, but do not mix it with unbuffered DIMMs — all slots must use registered ECC modules.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.