暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with gold edge connectors and black memory chips on both sides

OWC

OWC 16GB DDR4 2400MHz ECC Registered RDIMM 2R4D42R816GB memory upgrade

SKU CH-CTMR-7D9HP

16GB DDR4 2400MHz ECC registered RDIMM for select Supermicro server motherboards

  • Capacity16GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCYes
  • ECC registered design protects data integrity in servers
  • 2400 MHz DDR4 speed matches PC4-19200 specification
  • 16 GB capacity extends memory for virtualised workloads
  • Validated for five Supermicro X11SD motherboard models
  • 2 V operation reduces power draw per module

Server-grade ECC RDIMM upgrade

This 16GB DDR4 2400MHz module is built for Supermicro X11SDV and X11SDW motherboards. Registered ECC design corrects single-bit errors and buffers address lines for stable operation in multi-slot server and workstation configurations. It will not work in standard desktop boards or alongside unbuffered memory.

Sustained data integrity under load

ECC circuitry detects and corrects errors continuously during long compute runs, preventing silent data corruption in databases, virtualisation hosts and NAS workloads. Registered signalling reduces electrical load on the memory controller, allowing larger populations of DIMMs to run at the rated 2400MHz CL17 without timing degradation.

Low-voltage thermal profile

Operating at 1.2V, each module draws minimal power and generates little heat even when all channels are populated. No heat spreader is fitted, relying on chassis airflow for cooling; the registered buffer and ECC logic add negligible thermal load compared with unbuffered equivalents.

特長

  • ECC registered design protects data integrity in servers
  • 2400 MHz DDR4 speed matches PC4-19200 specification
  • 16 GB capacity extends memory for virtualised workloads
  • Validated for five Supermicro X11SD motherboard models
  • 2 V operation reduces power draw per module

仕様

BrandOWC
Part Number2R4D42R816GB
Capacity16GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X11SDV-12C-TP8F
Supermicro Motherboard X11SDV-16C+-TLN2F
Supermicro Motherboard X11SDV-16C-TLN2F
Supermicro Motherboard X11SDV-16C-TP8F
Supermicro Motherboard X11SDW-12C-TP13F

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How much power does the 1.2 V DDR4 2400 MHz ECC RDIMM draw when the server runs all day?

Each module operates at 1.2 V, the standard DDR4 voltage, so power draw stays low even under continuous load.

What motherboard slot and chipset must I already have for this 288-pin registered DIMM to work?

You need a Supermicro X11SDV or X11SDW board with DDR4 RDIMM slots that support ECC registered memory.

Can I add this 2Rx8 CL17 module alongside the existing Supermicro MEMDR416LCL06ER24 sticks in my X11SDV-16C-TLN2F?

Yes, it replaces those part numbers directly, but do not mix it with unbuffered DIMMs — all slots must use registered ECC modules.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。