Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green rectangular circuit board with gold edge connectors and black memory chips on both sides

OWC

OWC 16GB DDR4 2400MHz ECC Registered RDIMM 2R4D42R816GB memory upgrade

SKU CH-CTMR-7D9HP

16GB DDR4 2400MHz ECC registered RDIMM for select Supermicro server motherboards

  • Capacity16GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCYes
  • ECC registered design protects data integrity in servers
  • 2400 MHz DDR4 speed matches PC4-19200 specification
  • 16 GB capacity extends memory for virtualised workloads
  • Validated for five Supermicro X11SD motherboard models
  • 2 V operation reduces power draw per module

Server-grade ECC RDIMM upgrade

This 16GB DDR4 2400MHz module is built for Supermicro X11SDV and X11SDW motherboards. Registered ECC design corrects single-bit errors and buffers address lines for stable operation in multi-slot server and workstation configurations. It will not work in standard desktop boards or alongside unbuffered memory.

Sustained data integrity under load

ECC circuitry detects and corrects errors continuously during long compute runs, preventing silent data corruption in databases, virtualisation hosts and NAS workloads. Registered signalling reduces electrical load on the memory controller, allowing larger populations of DIMMs to run at the rated 2400MHz CL17 without timing degradation.

Low-voltage thermal profile

Operating at 1.2V, each module draws minimal power and generates little heat even when all channels are populated. No heat spreader is fitted, relying on chassis airflow for cooling; the registered buffer and ECC logic add negligible thermal load compared with unbuffered equivalents.

Fordele

  • ECC registered design protects data integrity in servers
  • 2400 MHz DDR4 speed matches PC4-19200 specification
  • 16 GB capacity extends memory for virtualised workloads
  • Validated for five Supermicro X11SD motherboard models
  • 2 V operation reduces power draw per module

Specifikationer

BrandOWC
Part Number2R4D42R816GB
Capacity16GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X11SDV-12C-TP8F
Supermicro Motherboard X11SDV-16C+-TLN2F
Supermicro Motherboard X11SDV-16C-TLN2F
Supermicro Motherboard X11SDV-16C-TP8F
Supermicro Motherboard X11SDW-12C-TP13F

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

How much power does the 1.2 V DDR4 2400 MHz ECC RDIMM draw when the server runs all day?

Each module operates at 1.2 V, the standard DDR4 voltage, so power draw stays low even under continuous load.

What motherboard slot and chipset must I already have for this 288-pin registered DIMM to work?

You need a Supermicro X11SDV or X11SDW board with DDR4 RDIMM slots that support ECC registered memory.

Can I add this 2Rx8 CL17 module alongside the existing Supermicro MEMDR416LCL06ER24 sticks in my X11SDV-16C-TLN2F?

Yes, it replaces those part numbers directly, but do not mix it with unbuffered DIMMs — all slots must use registered ECC modules.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.