暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 288-pin DDR4 ECC registered RDIMM module with black chips, no heat spreader

OWC

OWC 16GB DDR4 2666 PC4-21300 CL19 2Rx8 288-pin 1.2V ECC Registered RDIMM memory upgrade

SKU CH-T7N6-4K937

16 GB DDR4-2666 ECC Registered RDIMM adds error-correcting memory to the QNAP TS-2888X

  • Capacity16GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes
  • ECC registered design prevents data corruption in server workloads
  • 16 GB single module expands NAS capacity for virtualization
  • DDR4 2666 CL19 speed matches QNAP TS-2888X specifications
  • 2 V operation reduces power draw in 24/7 environments
  • Backward compatible with 2133 MHz and 2400 MHz systems

OWC 16GB DDR4 ECC Registered RDIMM

This 16GB DDR4 2666 ECC Registered RDIMM is built for the QNAP TS-2888X NAS system. It delivers 16GB capacity at PC4-21300 speed with CL19 latency and 1.2V operation. The module uses a 2Rx8 rank configuration on a 288-pin form factor. It is not compatible with standard desktop computers or unbuffered memory.

Installing in the QNAP TS-2888X

Installation follows the standard DIMM slot procedure for the TS-2888X chassis. The registered design requires a compatible server or workstation platform; it will not function in consumer motherboards. A common error is attempting to mix this registered module with unbuffered memory, which prevents boot. Ensure all slots use matching ECC registered specifications.

Verify your NAS model and memory configuration

Confirm the unit is a QNAP TS-2888X before ordering, as this module is system-specific. Check existing installed memory to avoid mixing registered and unbuffered types. The module is backward compatible with 2133MHz and 2400MHz operation. Buyers needing non-ECC memory or desktop DIMMs should select a different product.

特長

  • ECC registered design prevents data corruption in server workloads
  • 16 GB single module expands NAS capacity for virtualization
  • DDR4 2666 CL19 speed matches QNAP TS-2888X specifications
  • 2 V operation reduces power draw in 24/7 environments
  • Backward compatible with 2133 MHz and 2400 MHz systems

仕様

BrandOWC
Part Number2R6D42R816GB
Capacity16GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Heat SpreaderNo
Compatible SystemQNAP TS-2888X

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I verify the 16GB DDR4 2666 module is recognised and running at CL19 after installing it in my QNAP TS-2888X?

After installation, open the QNAP TS-2888X web interface, go to System Information or Hardware Monitor, and confirm the total capacity shows the added 16GB and the memory speed reads 2666MHz with CL19 timing.

What comes in the box and do I need any extra brackets or cables for the 288-pin RDIMM?

The box contains one OWC 16GB DDR4 2666 PC4-21300 CL19 2Rx8 288-pin 1.2V ECC Registered RDIMM module; no brackets, cables or additional parts are required for installation in the QNAP TS-2888X.

Should I choose the 16GB 2Rx8 CL19 version or a different capacity for my TS-2888X?

This single 16GB 2Rx8 CL19 RDIMM matches the QNAP part numbers RAM-16GDR4ECK0-RD-2666 and RAM-16GDR4ECT0-RD-2666; select it when you need one 16GB registered ECC module for the TS-2888X.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。