Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

OWC

OWC 16GB DDR4 2666 PC4-21300 CL19 2Rx8 288-pin 1.2V ECC Registered RDIMM memory upgrade

SKU CH-T7N6-4K937

16 GB DDR4-2666 ECC Registered RDIMM adds error-correcting memory to the QNAP TS-2888X

  • Capacity16GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes
  • ECC registered design prevents data corruption in server workloads
  • 16 GB single module expands NAS capacity for virtualization
  • DDR4 2666 CL19 speed matches QNAP TS-2888X specifications
  • 2 V operation reduces power draw in 24/7 environments
  • Backward compatible with 2133 MHz and 2400 MHz systems

OWC 16GB DDR4 ECC Registered RDIMM

This 16GB DDR4 2666 ECC Registered RDIMM is built for the QNAP TS-2888X NAS system. It delivers 16GB capacity at PC4-21300 speed with CL19 latency and 1.2V operation. The module uses a 2Rx8 rank configuration on a 288-pin form factor. It is not compatible with standard desktop computers or unbuffered memory.

Installing in the QNAP TS-2888X

Installation follows the standard DIMM slot procedure for the TS-2888X chassis. The registered design requires a compatible server or workstation platform; it will not function in consumer motherboards. A common error is attempting to mix this registered module with unbuffered memory, which prevents boot. Ensure all slots use matching ECC registered specifications.

Verify your NAS model and memory configuration

Confirm the unit is a QNAP TS-2888X before ordering, as this module is system-specific. Check existing installed memory to avoid mixing registered and unbuffered types. The module is backward compatible with 2133MHz and 2400MHz operation. Buyers needing non-ECC memory or desktop DIMMs should select a different product.

Kohokohdat

  • ECC registered design prevents data corruption in server workloads
  • 16 GB single module expands NAS capacity for virtualization
  • DDR4 2666 CL19 speed matches QNAP TS-2888X specifications
  • 2 V operation reduces power draw in 24/7 environments
  • Backward compatible with 2133 MHz and 2400 MHz systems

Tekniset tiedot

BrandOWC
Part Number2R6D42R816GB
Capacity16GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Heat SpreaderNo
Compatible SystemQNAP TS-2888X

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I verify the 16GB DDR4 2666 module is recognised and running at CL19 after installing it in my QNAP TS-2888X?

After installation, open the QNAP TS-2888X web interface, go to System Information or Hardware Monitor, and confirm the total capacity shows the added 16GB and the memory speed reads 2666MHz with CL19 timing.

What comes in the box and do I need any extra brackets or cables for the 288-pin RDIMM?

The box contains one OWC 16GB DDR4 2666 PC4-21300 CL19 2Rx8 288-pin 1.2V ECC Registered RDIMM module; no brackets, cables or additional parts are required for installation in the QNAP TS-2888X.

Should I choose the 16GB 2Rx8 CL19 version or a different capacity for my TS-2888X?

This single 16GB 2Rx8 CL19 RDIMM matches the QNAP part numbers RAM-16GDR4ECK0-RD-2666 and RAM-16GDR4ECT0-RD-2666; select it when you need one 16GB registered ECC module for the TS-2888X.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.