Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
13.3 inch FHD touch screen panel with antiglare finish

RAYPODO

RAYPODO BOE NV133FHM-T03 13.3" FHD 1920×1080 Touch Laptop Replacement Part

SKU CH-S2FG-BD1MW

A 13.3 inch FHD touch panel with ADS technology, 800:1 contrast, 15K-hour WLED backlight and 3H antiglare coating

  • Color262K, 45% NTSC

model BOE NV133FHM-T03

  • Sharp FHD visuals at 1920×1080 with 166 PPI clarity
  • Wide 85° viewing angles via ADS normally black technology
  • Reliable 15K-hour WLED backlight with built-in driver
  • Responsive on-cell touch control over USB interface
  • Slim 3 mm antiglare profile with 3H hard coating

Replacement LCD panel for 13.3 inch laptops

This BOE NV133FHM-T03 panel is a new laptop display spare part built for repair technicians and individual users who need to replace a damaged or faulty screen. It fits devices that accept a 13.3 inch FHD panel with eDP 1.2 signalling and On-Cell touch capability.

The eDP 1.2 interface at 2.7 Gbps per lane decides

The panel communicates through a 30-pin eDP 1.2 connection running at HBR1 2.7 Gbps per lane with 3.3 V input voltage. If the laptop motherboard uses a different signalling standard or pin assignment the screen will not work, so verify the service manual before ordering.

On-Cell touch with USB link adds touchscreen

The integrated On-Cell touch layer connects via USB, so the replacement restores touch input without a separate digitiser cable. The 3H antiglare coating reduces reflections, while the 3 mm slim profile and 11S4P WLED backlight rated for 15 K hours keep the assembly thin and reliable.

Põhijooned

  • Sharp FHD visuals at 1920×1080 with 166 PPI clarity
  • Wide 85° viewing angles via ADS normally black technology
  • Reliable 15K-hour WLED backlight with built-in driver
  • Responsive on-cell touch control over USB interface
  • Slim 3 mm antiglare profile with 3H hard coating

Tehnilised andmed

BrandBOE
ModelNV133FHM-T03
Color262K, 45% NTSC

Selle mudeli teised versioonid

5 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

How does the 166 PPI translate to on-screen clarity in daily use?

The 1920×1080 resolution across 13.3 inches yields 166 PPI, so text and fine details appear sharp without scaling for most viewing distances.

What does the eDP 1.2 interface with 2.7 Gbps per lane cap in practice?

The eDP 1.2 link at HBR1 2.7 Gbps per lane supports the panel's native 1920×1080 resolution at standard refresh rates for stable signal transmission.

Will the 3 mm slim profile and 30-pin connector fit my laptop's lid and cable?

The panel is 3 mm thick with a 30-pin eDP connector and 3.3 V input, matching many 13.3-inch FHD replacement designs; verify your chassis clearance and pin-out before ordering.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.