Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
13.3 inch FHD touch screen panel with antiglare finish

RAYPODO

RAYPODO BOE NV133FHM-T03 13.3" FHD 1920×1080 Touch Laptop Replacement Part

SKU CH-S2FG-BD1MW

A 13.3 inch FHD touch panel with ADS technology, 800:1 contrast, 15K-hour WLED backlight and 3H antiglare coating

  • Color262K, 45% NTSC

model BOE NV133FHM-T03

  • Sharp FHD visuals at 1920×1080 with 166 PPI clarity
  • Wide 85° viewing angles via ADS normally black technology
  • Reliable 15K-hour WLED backlight with built-in driver
  • Responsive on-cell touch control over USB interface
  • Slim 3 mm antiglare profile with 3H hard coating

Replacement LCD panel for 13.3 inch laptops

This BOE NV133FHM-T03 panel is a new laptop display spare part built for repair technicians and individual users who need to replace a damaged or faulty screen. It fits devices that accept a 13.3 inch FHD panel with eDP 1.2 signalling and On-Cell touch capability.

The eDP 1.2 interface at 2.7 Gbps per lane decides

The panel communicates through a 30-pin eDP 1.2 connection running at HBR1 2.7 Gbps per lane with 3.3 V input voltage. If the laptop motherboard uses a different signalling standard or pin assignment the screen will not work, so verify the service manual before ordering.

On-Cell touch with USB link adds touchscreen

The integrated On-Cell touch layer connects via USB, so the replacement restores touch input without a separate digitiser cable. The 3H antiglare coating reduces reflections, while the 3 mm slim profile and 11S4P WLED backlight rated for 15 K hours keep the assembly thin and reliable.

Privalumai

  • Sharp FHD visuals at 1920×1080 with 166 PPI clarity
  • Wide 85° viewing angles via ADS normally black technology
  • Reliable 15K-hour WLED backlight with built-in driver
  • Responsive on-cell touch control over USB interface
  • Slim 3 mm antiglare profile with 3H hard coating

Specifikacijos

BrandBOE
ModelNV133FHM-T03
Color262K, 45% NTSC

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

How does the 166 PPI translate to on-screen clarity in daily use?

The 1920×1080 resolution across 13.3 inches yields 166 PPI, so text and fine details appear sharp without scaling for most viewing distances.

What does the eDP 1.2 interface with 2.7 Gbps per lane cap in practice?

The eDP 1.2 link at HBR1 2.7 Gbps per lane supports the panel's native 1920×1080 resolution at standard refresh rates for stable signal transmission.

Will the 3 mm slim profile and 30-pin connector fit my laptop's lid and cable?

The panel is 3 mm thick with a 30-pin eDP connector and 3.3 V input, matching many 13.3-inch FHD replacement designs; verify your chassis clearance and pin-out before ordering.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.