Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
13.3 inch FHD touch screen panel with antiglare finish

RAYPODO

RAYPODO BOE NV133FHM-T03 13.3" FHD 1920×1080 Touch Laptop Replacement Part

SKU CH-S2FG-BD1MW

A 13.3 inch FHD touch panel with ADS technology, 800:1 contrast, 15K-hour WLED backlight and 3H antiglare coating

  • Color262K, 45% NTSC

model BOE NV133FHM-T03

  • Sharp FHD visuals at 1920×1080 with 166 PPI clarity
  • Wide 85° viewing angles via ADS normally black technology
  • Reliable 15K-hour WLED backlight with built-in driver
  • Responsive on-cell touch control over USB interface
  • Slim 3 mm antiglare profile with 3H hard coating

Replacement LCD panel for 13.3 inch laptops

This BOE NV133FHM-T03 panel is a new laptop display spare part built for repair technicians and individual users who need to replace a damaged or faulty screen. It fits devices that accept a 13.3 inch FHD panel with eDP 1.2 signalling and On-Cell touch capability.

The eDP 1.2 interface at 2.7 Gbps per lane decides

The panel communicates through a 30-pin eDP 1.2 connection running at HBR1 2.7 Gbps per lane with 3.3 V input voltage. If the laptop motherboard uses a different signalling standard or pin assignment the screen will not work, so verify the service manual before ordering.

On-Cell touch with USB link adds touchscreen

The integrated On-Cell touch layer connects via USB, so the replacement restores touch input without a separate digitiser cable. The 3H antiglare coating reduces reflections, while the 3 mm slim profile and 11S4P WLED backlight rated for 15 K hours keep the assembly thin and reliable.

Priekšrocības

  • Sharp FHD visuals at 1920×1080 with 166 PPI clarity
  • Wide 85° viewing angles via ADS normally black technology
  • Reliable 15K-hour WLED backlight with built-in driver
  • Responsive on-cell touch control over USB interface
  • Slim 3 mm antiglare profile with 3H hard coating

Specifikācijas

BrandBOE
ModelNV133FHM-T03
Color262K, 45% NTSC

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How does the 166 PPI translate to on-screen clarity in daily use?

The 1920×1080 resolution across 13.3 inches yields 166 PPI, so text and fine details appear sharp without scaling for most viewing distances.

What does the eDP 1.2 interface with 2.7 Gbps per lane cap in practice?

The eDP 1.2 link at HBR1 2.7 Gbps per lane supports the panel's native 1920×1080 resolution at standard refresh rates for stable signal transmission.

Will the 3 mm slim profile and 30-pin connector fit my laptop's lid and cable?

The panel is 3 mm thick with a 30-pin eDP connector and 3.3 V input, matching many 13.3-inch FHD replacement designs; verify your chassis clearance and pin-out before ordering.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.