BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277099BTC
Laos
Simmtec, Inc
Simmtec, Inc 32GB (2x16GB) DDR3-1600 PC3-12800 2Rx8 240-Pin 1.35V/1.5V NON-ECC UDIMM desktop RAM
Dual-voltage 32 GB kit (2 × 16 GB) running at DDR3-1600 PC3-12800 with 240-pin unbuffered NON-ECC UDIMM modules
- Capacity32GB (2 x 16GB)
- SpeedDDR3 1600 (PC3 12800)
- 32GB total capacity from two 16GB modules
- 1600MHz DDR3 speed rated at PC3-12800
- Dual-voltage 1.35V or 1.5V operation supported
- 240-pin UDIMM form factor fits standard desktop slots
- Non-ECC unbuffered design for consumer desktop systems
32GB DDR3-1600 Kit for Desktop Builders
This kit supplies 32GB of DDR3-1600 memory in two 16GB UDIMM modules. It targets desktop builders upgrading or repairing systems that use 240-pin DDR3 slots. The dual-voltage design operates at 1.35V or 1.5V for broad platform compatibility.
Capacity and headroom at 16GB per module
Each module provides 16GB, giving 32GB total across the pair. This capacity handles typical multitasking and memory-intensive applications on supported DDR3 platforms. The limit is reached when the motherboard's maximum memory per slot or total capacity is lower than 16GB per DIMM.
DDR3-1600 interface practical limits
The modules run at DDR3-1600 (PC3-12800) with a 2Rx8 organisation and 240-pin UDIMM form factor. Bandwidth and latency are fixed by the DDR3-1600 JEDEC specification. Systems requiring higher transfer rates or different DDR generations cannot use this kit.
Põhijooned
- 32GB total capacity from two 16GB modules
- 1600MHz DDR3 speed rated at PC3-12800
- Dual-voltage 1.35V or 1.5V operation supported
- 240-pin UDIMM form factor fits standard desktop slots
- Non-ECC unbuffered design for consumer desktop systems
Tehnilised andmed
| Capacity | 32GB (2 x 16GB) |
|---|---|
| Speed | DDR3 1600 (PC3 12800) |
Küsimused selle toote kohta
Will these 16 GB DDR3 modules run in a board that only supports 1.5 V memory?
Yes, the kit is dual-voltage 1.35 V and 1.5 V so it will operate at 1.5 V on older platforms.
How can I confirm the kit is running at DDR3-1600 after installation?
Check the memory tab in CPU-Z or the BIOS memory information screen; both should show 1600 MHz and PC3-12800.
What exactly ships in the box and is anything else required?
Two 16 GB 240-pin DDR3 UDIMMs are included; no cables, brackets or additional parts are needed for a standard desktop slot.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
