我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

Simmtec, Inc

Simmtec, Inc 32GB (2x16GB) DDR3-1600 PC3-12800 2Rx8 240-Pin 1.35V/1.5V NON-ECC UDIMM desktop RAM

SKU CH-MMP1-RF17B

Dual-voltage 32 GB kit (2 × 16 GB) running at DDR3-1600 PC3-12800 with 240-pin unbuffered NON-ECC UDIMM modules

  • Capacity32GB (2 x 16GB)
  • SpeedDDR3 1600 (PC3 12800)
  • 32GB total capacity from two 16GB modules
  • 1600MHz DDR3 speed rated at PC3-12800
  • Dual-voltage 1.35V or 1.5V operation supported
  • 240-pin UDIMM form factor fits standard desktop slots
  • Non-ECC unbuffered design for consumer desktop systems

32GB DDR3-1600 Kit for Desktop Builders

This kit supplies 32GB of DDR3-1600 memory in two 16GB UDIMM modules. It targets desktop builders upgrading or repairing systems that use 240-pin DDR3 slots. The dual-voltage design operates at 1.35V or 1.5V for broad platform compatibility.

Capacity and headroom at 16GB per module

Each module provides 16GB, giving 32GB total across the pair. This capacity handles typical multitasking and memory-intensive applications on supported DDR3 platforms. The limit is reached when the motherboard's maximum memory per slot or total capacity is lower than 16GB per DIMM.

DDR3-1600 interface practical limits

The modules run at DDR3-1600 (PC3-12800) with a 2Rx8 organisation and 240-pin UDIMM form factor. Bandwidth and latency are fixed by the DDR3-1600 JEDEC specification. Systems requiring higher transfer rates or different DDR generations cannot use this kit.

商品特色

  • 32GB total capacity from two 16GB modules
  • 1600MHz DDR3 speed rated at PC3-12800
  • Dual-voltage 1.35V or 1.5V operation supported
  • 240-pin UDIMM form factor fits standard desktop slots
  • Non-ECC unbuffered design for consumer desktop systems

商品規格

Capacity32GB (2 x 16GB)
SpeedDDR3 1600 (PC3 12800)

商品問答

Will these 16 GB DDR3 modules run in a board that only supports 1.5 V memory?

Yes, the kit is dual-voltage 1.35 V and 1.5 V so it will operate at 1.5 V on older platforms.

How can I confirm the kit is running at DDR3-1600 after installation?

Check the memory tab in CPU-Z or the BIOS memory information screen; both should show 1600 MHz and PC3-12800.

What exactly ships in the box and is anything else required?

Two 16 GB 240-pin DDR3 UDIMMs are included; no cables, brackets or additional parts are needed for a standard desktop slot.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。