暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Simmtec, Inc

Simmtec, Inc 32GB (2x16GB) DDR3-1600 PC3-12800 2Rx8 240-Pin 1.35V/1.5V NON-ECC UDIMM desktop RAM

SKU CH-MMP1-RF17B

Dual-voltage 32 GB kit (2 × 16 GB) running at DDR3-1600 PC3-12800 with 240-pin unbuffered NON-ECC UDIMM modules

  • Capacity32GB (2 x 16GB)
  • SpeedDDR3 1600 (PC3 12800)
  • 32GB total capacity from two 16GB modules
  • 1600MHz DDR3 speed rated at PC3-12800
  • Dual-voltage 1.35V or 1.5V operation supported
  • 240-pin UDIMM form factor fits standard desktop slots
  • Non-ECC unbuffered design for consumer desktop systems

32GB DDR3-1600 Kit for Desktop Builders

This kit supplies 32GB of DDR3-1600 memory in two 16GB UDIMM modules. It targets desktop builders upgrading or repairing systems that use 240-pin DDR3 slots. The dual-voltage design operates at 1.35V or 1.5V for broad platform compatibility.

Capacity and headroom at 16GB per module

Each module provides 16GB, giving 32GB total across the pair. This capacity handles typical multitasking and memory-intensive applications on supported DDR3 platforms. The limit is reached when the motherboard's maximum memory per slot or total capacity is lower than 16GB per DIMM.

DDR3-1600 interface practical limits

The modules run at DDR3-1600 (PC3-12800) with a 2Rx8 organisation and 240-pin UDIMM form factor. Bandwidth and latency are fixed by the DDR3-1600 JEDEC specification. Systems requiring higher transfer rates or different DDR generations cannot use this kit.

特長

  • 32GB total capacity from two 16GB modules
  • 1600MHz DDR3 speed rated at PC3-12800
  • Dual-voltage 1.35V or 1.5V operation supported
  • 240-pin UDIMM form factor fits standard desktop slots
  • Non-ECC unbuffered design for consumer desktop systems

仕様

Capacity32GB (2 x 16GB)
SpeedDDR3 1600 (PC3 12800)

この商品に関する質問

Will these 16 GB DDR3 modules run in a board that only supports 1.5 V memory?

Yes, the kit is dual-voltage 1.35 V and 1.5 V so it will operate at 1.5 V on older platforms.

How can I confirm the kit is running at DDR3-1600 after installation?

Check the memory tab in CPU-Z or the BIOS memory information screen; both should show 1600 MHz and PC3-12800.

What exactly ships in the box and is anything else required?

Two 16 GB 240-pin DDR3 UDIMMs are included; no cables, brackets or additional parts are needed for a standard desktop slot.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。