Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Compact green circuit board with CF slot and 50-pin 1.8-inch IDE connector

SMUGDESK

SMUGDESK CF to 50Pin 1.8" IDE SSD Adapter

SKU CH-0TCQ-QY75E

Converts a standard CF card into a solid-state 50-pin 1.8-inch IDE drive for legacy notebook and industrial system upgrades

  • Converts CF cards to 50pin 1.8inch IDE interface
  • Solidstate replacement removes mechanical failure risk from aging HDDs
  • Compact form factor matches 1.8inch mounting for direct dropin fit
  • Vibrationresistant flash storage has no moving parts for industrial use
  • Driverfree plugandplay works with legacy notebooks and embedded systems

CF to 1.8" IDE adapter for legacy upgrades

This adapter converts a standard CompactFlash card into a 50-pin 1.8-inch IDE solid-state drive. It targets technicians repairing vintage notebooks, industrial controllers, or embedded systems that still rely on the 1.8-inch form factor. The unit serves as a direct mechanical replacement for failed spinning disks.

Limited to 50-pin 1.8-inch IDE only

The connector fits exclusively 50-pin 1.8-inch IDE ports and will not mate with 2.5-inch IDE interfaces. Only standard CF cards are accepted; CFast, SD, and microSD media are not supported. No drivers are required for most legacy operating systems, but the host must provide a native 1.8-inch IDE channel.

50-pin 1.8-inch IDE interface decides fit

Verify that the target device uses a 50-pin 1.8-inch IDE hard-drive socket before ordering. The adapter’s physical dimensions match the 1.8-inch mounting pattern for drop-in installation. If the system uses any other interface, this part will not work.

Põhijooned

  • Converts CF cards to 50pin 1.8inch IDE interface
  • Solidstate replacement removes mechanical failure risk from aging HDDs
  • Compact form factor matches 1.8inch mounting for direct dropin fit
  • Vibrationresistant flash storage has no moving parts for industrial use
  • Driverfree plugandplay works with legacy notebooks and embedded systems

Tehnilised andmed

Selle toote kohta ei ole veel tehnilisi andmeid avaldatud.

Küsimused selle toote kohta

Which CF card capacity should I choose for this 50pin 1.8inch IDE adapter?

The adapter accepts any standard Compact Flash card; select a capacity that matches the storage needs of your legacy notebook or embedded system.

What does the 1.8inch form factor mean once the adapter is installed in my device?

It matches the original 1.8inch IDE drive dimensions, so the adapter drops directly into the drive bay without brackets or modifications.

Will this 50pin IDE interface work with a 2.5inch IDE port on my laptop?

No, the adapter is built exclusively for 50pin 1.8inch IDE ports and will not fit 2.5inch IDE interfaces.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.