نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

SMUGDESK

SMUGDESK CF to 50Pin 1.8" IDE SSD Adapter

SKU CH-0TCQ-QY75E

Converts a standard CF card into a solid-state 50-pin 1.8-inch IDE drive for legacy notebook and industrial system upgrades

  • Converts CF cards to 50pin 1.8inch IDE interface
  • Solidstate replacement removes mechanical failure risk from aging HDDs
  • Compact form factor matches 1.8inch mounting for direct dropin fit
  • Vibrationresistant flash storage has no moving parts for industrial use
  • Driverfree plugandplay works with legacy notebooks and embedded systems

CF to 1.8" IDE adapter for legacy upgrades

This adapter converts a standard CompactFlash card into a 50-pin 1.8-inch IDE solid-state drive. It targets technicians repairing vintage notebooks, industrial controllers, or embedded systems that still rely on the 1.8-inch form factor. The unit serves as a direct mechanical replacement for failed spinning disks.

Limited to 50-pin 1.8-inch IDE only

The connector fits exclusively 50-pin 1.8-inch IDE ports and will not mate with 2.5-inch IDE interfaces. Only standard CF cards are accepted; CFast, SD, and microSD media are not supported. No drivers are required for most legacy operating systems, but the host must provide a native 1.8-inch IDE channel.

50-pin 1.8-inch IDE interface decides fit

Verify that the target device uses a 50-pin 1.8-inch IDE hard-drive socket before ordering. The adapter’s physical dimensions match the 1.8-inch mounting pattern for drop-in installation. If the system uses any other interface, this part will not work.

أبرز المميزات

  • Converts CF cards to 50pin 1.8inch IDE interface
  • Solidstate replacement removes mechanical failure risk from aging HDDs
  • Compact form factor matches 1.8inch mounting for direct dropin fit
  • Vibrationresistant flash storage has no moving parts for industrial use
  • Driverfree plugandplay works with legacy notebooks and embedded systems

المواصفات

لا توجد مواصفات منشورة لهذا المنتج بعد.

أسئلة حول هذا المنتج

Which CF card capacity should I choose for this 50pin 1.8inch IDE adapter?

The adapter accepts any standard Compact Flash card; select a capacity that matches the storage needs of your legacy notebook or embedded system.

What does the 1.8inch form factor mean once the adapter is installed in my device?

It matches the original 1.8inch IDE drive dimensions, so the adapter drops directly into the drive bay without brackets or modifications.

Will this 50pin IDE interface work with a 2.5inch IDE port on my laptop?

No, the adapter is built exclusively for 50pin 1.8inch IDE ports and will not fit 2.5inch IDE interfaces.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.