Solidigm D3-S4620 960GB 2.5" SATA enterprise SSD SSDSC2KG960GZ1Z
- 2.5"
- 960GB
Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.
Solidigm
A 2.5" SATA enterprise SSD with 480GB capacity, 144L TLC 3D NAND, up to 550 MBps read and 500 MBps write, and 4.7 DWPD endurance
The Solidigm D3-S4620 is a 2.5in SATA III solid-state drive built for data-centre workloads. It uses 144L TLC 3D NAND to deliver up to 550 MBps sequential read and 500 MBps sequential write. Random performance reaches 85,000 IOPS read and 48,000 IOPS write. The drive is rated for 4.7 DWPD endurance and a 2,000,000-hour MTBF.
This drive fits servers and storage arrays that need consistent low-latency reads and high endurance over a SATA interface. It operates from 0°C to 70°C and tolerates 1,000 G shock. Buyers who require PCIe bandwidth or higher capacity than 480GB should consider other form factors.
The 4.7 drive writes per day figure defines how much data can be written daily across the warranty period. With 4.0 PBW total bytes written, it matches workloads such as boot, logging and caching. If your application exceeds this write intensity, a higher DWPD model is required.
| Brand | Solidigm |
|---|---|
| Model | D3-S4620 |
| Part Number | SSDSC2KG480GZ1Z |
| Form Factor | 2.5" |
| Capacity | 480GB |
| Memory Components | 144L TLC 3D NAND |
| Interface | SATA III |
| Max Sequential Read | Up to 550 MBps |
| Max Sequential Write | Up to 500 MBps |
| 4KB Random Read | Up to 85,000 IOPS |
| 4KB Random Write | Up to 48,000 IOPS |
| Read Latency | 103µs |
| Write Latency | 43µs |
| Endurance | Up to 4.7 DWPD / Up to 4.0 PBW |
| MTBF | 2,000,000 hours |
| Power Consumption (Idle) | 1W |
| Power Consumption (Active) | 2.9W |
| Operating Temperature | 0°C to 70°C |
| Max Shock Resistance | 1,000 G (Max) at 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Max Non-Operating: 3.13 GRMS (5 - 800 Hz) Max |
| Weight | 60.7 gms |
| Tarnekaal | 0.91 kg |
| Pakendi mõõtmed | 178 × 127 × 76 mm |
Selle mudeli teised versioonid
Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.
Mount the drive in a 2.5in bay, connect the SATA data and power cables, then enable AHCI or RAID in the BIOS so the OS sees the full 480GB capacity.
The 144L TLC NAND is rated for 4.7 DWPD and 4.0 PBW; once that write budget is used the drive should be replaced, though the 2,000,000-hour MTBF suggests years of operation first.
The sequential write ceiling of 500 MBps and 48,000 random write IOPS will be reached before the 70°C operating temperature or 2.9W active power draw become constraints.
Veel samast osakonnast
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
See, millega maksate, ja see, milles vaatate hindu.
Saadetud teie rahakotist kassas
Ainult kuvamiseks — kataloogi hinnad on dollarites
Ükski vääring ei vasta sellele.
Valige keel, milles sait teiega räägib.
Ükski keel ei vasta.
Esimest korda siin?
Teil on juba konto?
Automaatset lähtestamist ei ole: see pood ei saada ühtegi e-kirja, seega pole ka ühekordset linki, mida küsida. Jätke aadress kontole alles, seda käsitletakse käsitsi.
Päring registreeritud
Teie postkasti ei jõua midagi — see pood ei saada e-kirju üldse. Keegi tegeleb sellega käsitsi.
Tuli meelde?