Solidigm D3-S4620 960GB 2.5" SATA enterprise SSD SSDSC2KG960GZ1Z
- 2.5"
- 960GB
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Solidigm
A 2.5" SATA enterprise SSD with 480GB capacity, 144L TLC 3D NAND, up to 550 MBps read and 500 MBps write, and 4.7 DWPD endurance
The Solidigm D3-S4620 is a 2.5in SATA III solid-state drive built for data-centre workloads. It uses 144L TLC 3D NAND to deliver up to 550 MBps sequential read and 500 MBps sequential write. Random performance reaches 85,000 IOPS read and 48,000 IOPS write. The drive is rated for 4.7 DWPD endurance and a 2,000,000-hour MTBF.
This drive fits servers and storage arrays that need consistent low-latency reads and high endurance over a SATA interface. It operates from 0°C to 70°C and tolerates 1,000 G shock. Buyers who require PCIe bandwidth or higher capacity than 480GB should consider other form factors.
The 4.7 drive writes per day figure defines how much data can be written daily across the warranty period. With 4.0 PBW total bytes written, it matches workloads such as boot, logging and caching. If your application exceeds this write intensity, a higher DWPD model is required.
| Brand | Solidigm |
|---|---|
| Model | D3-S4620 |
| Part Number | SSDSC2KG480GZ1Z |
| Form Factor | 2.5" |
| Capacity | 480GB |
| Memory Components | 144L TLC 3D NAND |
| Interface | SATA III |
| Max Sequential Read | Up to 550 MBps |
| Max Sequential Write | Up to 500 MBps |
| 4KB Random Read | Up to 85,000 IOPS |
| 4KB Random Write | Up to 48,000 IOPS |
| Read Latency | 103µs |
| Write Latency | 43µs |
| Endurance | Up to 4.7 DWPD / Up to 4.0 PBW |
| MTBF | 2,000,000 hours |
| Power Consumption (Idle) | 1W |
| Power Consumption (Active) | 2.9W |
| Operating Temperature | 0°C to 70°C |
| Max Shock Resistance | 1,000 G (Max) at 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Max Non-Operating: 3.13 GRMS (5 - 800 Hz) Max |
| Weight | 60.7 gms |
| Lähetyspaino | 0.91 kg |
| Pakkauksen mitat | 178 × 127 × 76 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Mount the drive in a 2.5in bay, connect the SATA data and power cables, then enable AHCI or RAID in the BIOS so the OS sees the full 480GB capacity.
The 144L TLC NAND is rated for 4.7 DWPD and 4.0 PBW; once that write budget is used the drive should be replaced, though the 2,000,000-hour MTBF suggests years of operation first.
The sequential write ceiling of 500 MBps and 48,000 random write IOPS will be reached before the 70°C operating temperature or 2.9W active power draw become constraints.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?