Solidigm D3-S4620 960GB 2.5" SATA enterprise SSD SSDSC2KG960GZ1Z
- 2.5"
- 960GB
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Solidigm
A 2.5" SATA enterprise SSD with 480GB capacity, 144L TLC 3D NAND, up to 550 MBps read and 500 MBps write, and 4.7 DWPD endurance
The Solidigm D3-S4620 is a 2.5in SATA III solid-state drive built for data-centre workloads. It uses 144L TLC 3D NAND to deliver up to 550 MBps sequential read and 500 MBps sequential write. Random performance reaches 85,000 IOPS read and 48,000 IOPS write. The drive is rated for 4.7 DWPD endurance and a 2,000,000-hour MTBF.
This drive fits servers and storage arrays that need consistent low-latency reads and high endurance over a SATA interface. It operates from 0°C to 70°C and tolerates 1,000 G shock. Buyers who require PCIe bandwidth or higher capacity than 480GB should consider other form factors.
The 4.7 drive writes per day figure defines how much data can be written daily across the warranty period. With 4.0 PBW total bytes written, it matches workloads such as boot, logging and caching. If your application exceeds this write intensity, a higher DWPD model is required.
| Brand | Solidigm |
|---|---|
| Model | D3-S4620 |
| Part Number | SSDSC2KG480GZ1Z |
| Form Factor | 2.5" |
| Capacity | 480GB |
| Memory Components | 144L TLC 3D NAND |
| Interface | SATA III |
| Max Sequential Read | Up to 550 MBps |
| Max Sequential Write | Up to 500 MBps |
| 4KB Random Read | Up to 85,000 IOPS |
| 4KB Random Write | Up to 48,000 IOPS |
| Read Latency | 103µs |
| Write Latency | 43µs |
| Endurance | Up to 4.7 DWPD / Up to 4.0 PBW |
| MTBF | 2,000,000 hours |
| Power Consumption (Idle) | 1W |
| Power Consumption (Active) | 2.9W |
| Operating Temperature | 0°C to 70°C |
| Max Shock Resistance | 1,000 G (Max) at 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Max Non-Operating: 3.13 GRMS (5 - 800 Hz) Max |
| Weight | 60.7 gms |
| Prepravná hmotnosť | 0.91 kg |
| Rozmery balenia | 178 × 127 × 76 mm |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
Mount the drive in a 2.5in bay, connect the SATA data and power cables, then enable AHCI or RAID in the BIOS so the OS sees the full 480GB capacity.
The 144L TLC NAND is rated for 4.7 DWPD and 4.0 PBW; once that write budget is used the drive should be replaced, though the 2,000,000-hour MTBF suggests years of operation first.
The sequential write ceiling of 500 MBps and 48,000 random write IOPS will be reached before the 70°C operating temperature or 2.9W active power draw become constraints.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?