Thermaltake
Thermaltake SWAFAN EX14 140mm ARGB case fan 3-pack CL-F170-PL14SW-A
Three 140 mm ARGB fans with reversible blades, hydraulic bearings and PWM speeds from 500 to 2000 RPM
- Fan Counts3 Fans
- Fan ControllerNo Controller
- TypeCase Fan
- Fan Size140mm
- Fan Thickness25mm
- Bearing TypeHydraulic
- Three fans deliver 81.6 CFM each at full speed
- PWM control spans 500 to 2000 RPM for quiet or maximum airflow
- Hydraulic bearing rated for long service life at 34.5 dB-A
- Reversible blades included for push or pull configurations without extra parts
- 5 V ARGB lighting syncs with motherboard software via 3-pin header
Three 140mm ARGB fans for white-themed builds
This pack contains three 140mm case fans finished in white with addressable RGB lighting. Each unit uses a hydraulic bearing and runs between 500 and 2000 RPM under PWM control. They are aimed at builders who want coordinated lighting and reversible airflow in a single kit.
Magnetic blades swap in seconds.
Standard blades come pre-installed and three reverse blades are supplied for push-pull or exhaust setups. The magnetic mounting lets you change orientation without tools. Because no fan controller is bundled, you must connect every unit to a 4-pin PWM header and a 5V 3-pin ARGB header on the motherboard.
Check for 5V ARGB headers and 140mm mounting points
Your board needs a 5V 3-pin ARGB connector and enough 4-pin PWM headers for three fans, or a powered hub. Verify that your case accepts 140mm fans at the intended locations and that 25mm thickness clears nearby components. The kit includes only frames, blades and cables.
Põhijooned
- Three fans deliver 81.6 CFM each at full speed
- PWM control spans 500 to 2000 RPM for quiet or maximum airflow
- Hydraulic bearing rated for long service life at 34.5 dB-A
- Reversible blades included for push or pull configurations without extra parts
- 5 V ARGB lighting syncs with motherboard software via 3-pin header
Tehnilised andmed
| Brand | Thermaltake |
|---|---|
| Model | SWAFAN EX14 |
| Part Number | CL-F170-PL14SW-A |
| Fan Counts | 3 Fans |
| Fan Controller | No Controller |
| Type | Case Fan |
| Fan Size | 140mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic |
| RPM | PWM 500 ~ 2000 R.P.M |
| Air Flow | Standard Fan Blade: 81.6 CFM (one fan) Reverse Fan Blade: 79.3 CFM (one fan) |
| Noise Level | Standard Fan Blade: 34.5 dB-A (one fan) Reverse Fan Blade: 38.8 dB-A (one fan) |
| Power Connector | 2510-4 PIN PWM, 5V ARGB header-3PIN |
| Color | White |
| LED | ARGB |
| Dimensions | 140 x 140 x 25 mm |
| Package Contents | 3 x Fan Frames 3 x Standard Fan Blade (Pre-installed) 3 x Reverse Fan Blade 3 x Cable |
| Tarnekaal | 1.32 kg |
| Pakendi mõõtmed | 203 × 170 × 150 mm |
Küsimused selle toote kohta
How do I confirm the three SWAFAN EX14 fans are spinning correctly after installation?
Connect the 2510-4 PIN PWM cables to the motherboard and use BIOS or fan-control software to verify each fan runs between 500 and 2000 RPM; listen for noise around 34.5 dB-A with standard blades or 38.8 dB-A with reverse blades.
What comes in the box and what must I supply myself for the CL-F170-PL14SW-A 3-pack?
The package includes three fan frames, three standard blades pre-installed, three reverse blades and three cables; you must provide a motherboard with a 2510-4 PIN PWM header and a 5V ARGB 3-pin header for lighting control.
Should I choose the standard or reverse blades for my SWAFAN EX14 setup?
Standard blades deliver 81.6 CFM at 34.5 dB-A per fan, while reverse blades give 79.3 CFM at 38.8 dB-A; use standard blades for intake and reverse blades for exhaust to balance airflow direction.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
Thermal Grizzly
Thermal Grizzly TG-MP8-120-20-30-1R Minus Pad 8 chipset cooling 120x20x3.0mm
9,99 $
0.00012831BTC
Laos
DOCTOR METAL
DOCTOR METAL 3x 120mm case fan pack white with controller
- Case Fan
- Case
91,99 $
0.00118151BTC
Laos