Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Three white 140mm ARGB case fans with interchangeable blades and magnetic frame design

Thermaltake

Thermaltake SWAFAN EX14 140mm ARGB case fan 3-pack CL-F170-PL14SW-A

SKU CH-PDX5-GD4SE MPN CL-F170-PL14SW-A

Three 140 mm ARGB fans with reversible blades, hydraulic bearings and PWM speeds from 500 to 2000 RPM

  • Fan Counts3 Fans
  • Fan ControllerNo Controller
  • TypeCase Fan
  • Fan Size140mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic
  • Three fans deliver 81.6 CFM each at full speed
  • PWM control spans 500 to 2000 RPM for quiet or maximum airflow
  • Hydraulic bearing rated for long service life at 34.5 dB-A
  • Reversible blades included for push or pull configurations without extra parts
  • 5 V ARGB lighting syncs with motherboard software via 3-pin header

Three 140mm ARGB fans for white-themed builds

This pack contains three 140mm case fans finished in white with addressable RGB lighting. Each unit uses a hydraulic bearing and runs between 500 and 2000 RPM under PWM control. They are aimed at builders who want coordinated lighting and reversible airflow in a single kit.

Magnetic blades swap in seconds.

Standard blades come pre-installed and three reverse blades are supplied for push-pull or exhaust setups. The magnetic mounting lets you change orientation without tools. Because no fan controller is bundled, you must connect every unit to a 4-pin PWM header and a 5V 3-pin ARGB header on the motherboard.

Check for 5V ARGB headers and 140mm mounting points

Your board needs a 5V 3-pin ARGB connector and enough 4-pin PWM headers for three fans, or a powered hub. Verify that your case accepts 140mm fans at the intended locations and that 25mm thickness clears nearby components. The kit includes only frames, blades and cables.

Istaknuto

  • Three fans deliver 81.6 CFM each at full speed
  • PWM control spans 500 to 2000 RPM for quiet or maximum airflow
  • Hydraulic bearing rated for long service life at 34.5 dB-A
  • Reversible blades included for push or pull configurations without extra parts
  • 5 V ARGB lighting syncs with motherboard software via 3-pin header

Specifikacije

BrandThermaltake
ModelSWAFAN EX14
Part NumberCL-F170-PL14SW-A
Fan Counts3 Fans
Fan ControllerNo Controller
TypeCase Fan
Fan Size140mm
Fan Thickness25mm
Bearing TypeHydraulic
RPMPWM 500 ~ 2000 R.P.M
Air FlowStandard Fan Blade: 81.6 CFM (one fan)
Reverse Fan Blade: 79.3 CFM (one fan)
Noise LevelStandard Fan Blade: 34.5 dB-A (one fan)
Reverse Fan Blade: 38.8 dB-A (one fan)
Power Connector2510-4 PIN PWM, 5V ARGB header-3PIN
ColorWhite
LEDARGB
Dimensions140 x 140 x 25 mm
Package Contents3 x Fan Frames
3 x Standard Fan Blade (Pre-installed)
3 x Reverse Fan Blade
3 x Cable
Težina pošiljke1.32 kg
Dimenzije pakiranja203 × 170 × 150 mm

Pitanja o ovom artiklu

How do I confirm the three SWAFAN EX14 fans are spinning correctly after installation?

Connect the 2510-4 PIN PWM cables to the motherboard and use BIOS or fan-control software to verify each fan runs between 500 and 2000 RPM; listen for noise around 34.5 dB-A with standard blades or 38.8 dB-A with reverse blades.

What comes in the box and what must I supply myself for the CL-F170-PL14SW-A 3-pack?

The package includes three fan frames, three standard blades pre-installed, three reverse blades and three cables; you must provide a motherboard with a 2510-4 PIN PWM header and a 5V ARGB 3-pin header for lighting control.

Should I choose the standard or reverse blades for my SWAFAN EX14 setup?

Standard blades deliver 81.6 CFM at 34.5 dB-A per fan, while reverse blades give 79.3 CFM at 38.8 dB-A; use standard blades for intake and reverse blades for exhaust to balance airflow direction.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.