Timetec
Timetec 1TB x10 NVMe PCIe 3.0 M.2 2280 internal SSD
Ten 1 TB NVMe drives with PCIe 3.0 x4 interface, 3D NAND TLC and SLC cache reaching 2000 MB/s read and 1600 MB/s write
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity1TBx10
- Memory Components3D NAND TLC
- InterfacePCI-Express 3.0 x4
Options 1TB (10 Pack)
- 256GB (1 Pack)
- 256GB (10 Pack)
- 512GB (10 Pack)
- 1TB (1 Pack)
- 512GB (1 Pack)
- 1TB (10 Pack)
- Ten-drive pack simplifies bulk upgrades
- Sequential read up to 2000 MB/s accelerates large-file workflows
- Sequential write up to 1600 MB/s shortens project save times
- 600 TBW endurance rating supports heavy write workloads
- 1,500,000-hour MTBF indicates long-term reliability
Ten-drive pack for system builders
This pack contains ten M.2 2280 solid-state drives, each with a 1 TB capacity, giving a total of 10 TB of flash storage in one purchase. The drives use a PCIe 3.0 x4 interface and 3D NAND TLC memory, making them suitable for desktop, laptop and compact PC upgrades where multiple identical units are needed.
PCIe 3.0 x4 bandwidth ceiling
The PCIe 3.0 x4 link caps sustained throughput at roughly 8 Gb/s per lane, so sequential transfers top out at the rated 2000 MB/s read and 1600 MB/s write. Performance will not exceed these figures even if the host platform supports newer PCIe generations, because the drive controller is limited to Gen 3 signalling.
600 TBW per drive and SLC cache headroom
Each unit is rated for 600 TB of total bytes written, providing ample endurance for typical consumer workloads including OS boot, game libraries and 4K content creation. The onboard SLC cache absorbs burst writes at higher speed, but sustained heavy writes will settle to the native TLC rate once the cache fills.
Põhijooned
- Ten-drive pack simplifies bulk upgrades
- Sequential read up to 2000 MB/s accelerates large-file workflows
- Sequential write up to 1600 MB/s shortens project save times
- 600 TBW endurance rating supports heavy write workloads
- 1,500,000-hour MTBF indicates long-term reliability
Tehnilised andmed
| Brand | Timetec |
|---|---|
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TBx10 |
| Memory Components | 3D NAND TLC |
| Interface | PCI-Express 3.0 x4 |
| Max Sequential Read | Up to 2000 MBps |
| Max Sequential Write | Up to 1600 MBps |
Selle mudeli teised versioonid
5 veel samast sarjast
Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.
Timetec
Timetec 512GB NVMe M.2 2280 internal SSD
- Up to 2000 MBps
- Up to 1600 MBps
64,99 $
0.00083685BTC
Laos
Timetec
Timetec 35TTFP6PCIE-1TB 1TB M.2 2280 internal SSD
- Internal Solid Stat…
- Consumer
102,99 $
0.00132617BTC
Laos
Küsimused selle toote kohta
Should I buy the 10-pack of 1 TB drives or look for a single larger drive?
This listing is a 10-pack of 1 TB units; each drive is a separate M.2 2280 stick. Choose the pack if you are upgrading multiple laptops or desktops, otherwise buy the quantity you need.
Will I actually see 2,000 MB/s read and 1,600 MB/s write in my laptop?
Those are maximum sequential speeds over a PCIe 3.0 x4 link. Real-world throughput depends on the system's M.2 slot generation, thermal limits and the workload mix.
Does the PCIe 3.0 x4 interface cap the drive below its rated speeds?
The drive is designed for PCIe 3.0 x4, so its 2,000/1,600 MB/s ratings are the practical ceiling on that interface; a PCIe 4.0 slot will not raise them.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
