Zyvpee
Zyvpee 614 6025 60x25mm 24V 2.5W 2 Pin case fan
60 × 25 mm ball-bearing case fan running on 24 V at 2.5 W with a 2-pin connector
- TypeCase Fan
- CompatibilityCase
- Bearing TypeBall
- Power Connector2 Pin
- ColorBlack
- LEDNon-LED
- Ball bearing for long service life
- 24 V 2.5 W DC motor for efficient cooling
- 60×60×25 mm frame fits 6025 mount
- Two-pin power connector for simple install
- Non-LED black design keeps builds clean
60 mm DC square cooler
The Zyvpee 614 is a 60 mm case fan built for 24 V DC systems. It draws 2.5 W through a two-pin connector and uses a ball bearing for continuous operation. The black, non-LED frame fits standard 60 by 60 by 25 mm mounting points in servers or compact enclosures.
Upgrade from sleeve-bearing 60 mm fans
This model replaces older sleeve-bearing units that wear faster in 24 V environments. The ball bearing extends service life when the fan runs at constant speed. The jump is worth it when the existing cooler develops noise or vibration after prolonged duty cycles.
Fits 60 mm mounts with two-pin 24 V headers
The fan needs a 24 V two-pin header and the standard 60 mm square cut-out. It frees up the three- or four-pin headers for PWM-controlled components elsewhere in the build. Ensure the power source delivers 24 V DC before installation.
Põhijooned
- Ball bearing for long service life
- 24 V 2.5 W DC motor for efficient cooling
- 60×60×25 mm frame fits 6025 mount
- Two-pin power connector for simple install
- Non-LED black design keeps builds clean
Tehnilised andmed
| Series | 614 |
|---|---|
| Model | 614 |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Ball |
| Power Connector | 2 Pin |
| Color | Black |
| LED | Non-LED |
| Features | DC square Cooler |
| Dimensions | 60*60*25mm |
Küsimused selle toote kohta
What screw spacing does the 60 mm square frame need for mounting?
The 60*60*25 mm frame uses the standard 60 mm fan mounting pattern with four corner holes spaced 60 mm centre-to-centre.
How do I connect the 2-pin power lead to a motherboard header?
Align the two-pin plug with the 24 V fan header key and press straight down; reversing the pins will prevent the fan from spinning.
When should the ball-bearing motor be replaced?
Expect the ball-bearing motor to run continuously for years; replace the unit when bearing noise appears or airflow drops below usable levels.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001048BTC
Laos