暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 60x60x25mm square case fan with two-wire connector

Zyvpee

Zyvpee 614 6025 60x25mm 24V 2.5W 2 Pin case fan

SKU CH-WTWZ-AMHAN

60 × 25 mm ball-bearing case fan running on 24 V at 2.5 W with a 2-pin connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • Ball bearing for long service life
  • 24 V 2.5 W DC motor for efficient cooling
  • 60×60×25 mm frame fits 6025 mount
  • Two-pin power connector for simple install
  • Non-LED black design keeps builds clean

60 mm DC square cooler

The Zyvpee 614 is a 60 mm case fan built for 24 V DC systems. It draws 2.5 W through a two-pin connector and uses a ball bearing for continuous operation. The black, non-LED frame fits standard 60 by 60 by 25 mm mounting points in servers or compact enclosures.

Upgrade from sleeve-bearing 60 mm fans

This model replaces older sleeve-bearing units that wear faster in 24 V environments. The ball bearing extends service life when the fan runs at constant speed. The jump is worth it when the existing cooler develops noise or vibration after prolonged duty cycles.

Fits 60 mm mounts with two-pin 24 V headers

The fan needs a 24 V two-pin header and the standard 60 mm square cut-out. It frees up the three- or four-pin headers for PWM-controlled components elsewhere in the build. Ensure the power source delivers 24 V DC before installation.

特長

  • Ball bearing for long service life
  • 24 V 2.5 W DC motor for efficient cooling
  • 60×60×25 mm frame fits 6025 mount
  • Two-pin power connector for simple install
  • Non-LED black design keeps builds clean

仕様

Series614
Model614
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions60*60*25mm

この商品に関する質問

What screw spacing does the 60 mm square frame need for mounting?

The 60*60*25 mm frame uses the standard 60 mm fan mounting pattern with four corner holes spaced 60 mm centre-to-centre.

How do I connect the 2-pin power lead to a motherboard header?

Align the two-pin plug with the 24 V fan header key and press straight down; reversing the pins will prevent the fan from spinning.

When should the ball-bearing motor be replaced?

Expect the ball-bearing motor to run continuously for years; replace the unit when bearing noise appears or airflow drops below usable levels.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。