Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black 60x60x25mm square case fan with two-wire connector

Zyvpee

Zyvpee 614 6025 60x25mm 24V 2.5W 2 Pin case fan

SKU CH-WTWZ-AMHAN

60 × 25 mm ball-bearing case fan running on 24 V at 2.5 W with a 2-pin connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • Ball bearing for long service life
  • 24 V 2.5 W DC motor for efficient cooling
  • 60×60×25 mm frame fits 6025 mount
  • Two-pin power connector for simple install
  • Non-LED black design keeps builds clean

60 mm DC square cooler

The Zyvpee 614 is a 60 mm case fan built for 24 V DC systems. It draws 2.5 W through a two-pin connector and uses a ball bearing for continuous operation. The black, non-LED frame fits standard 60 by 60 by 25 mm mounting points in servers or compact enclosures.

Upgrade from sleeve-bearing 60 mm fans

This model replaces older sleeve-bearing units that wear faster in 24 V environments. The ball bearing extends service life when the fan runs at constant speed. The jump is worth it when the existing cooler develops noise or vibration after prolonged duty cycles.

Fits 60 mm mounts with two-pin 24 V headers

The fan needs a 24 V two-pin header and the standard 60 mm square cut-out. It frees up the three- or four-pin headers for PWM-controlled components elsewhere in the build. Ensure the power source delivers 24 V DC before installation.

Helstu kostir

  • Ball bearing for long service life
  • 24 V 2.5 W DC motor for efficient cooling
  • 60×60×25 mm frame fits 6025 mount
  • Two-pin power connector for simple install
  • Non-LED black design keeps builds clean

Tæknilýsing

Series614
Model614
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions60*60*25mm

Spurningar um þessa vöru

What screw spacing does the 60 mm square frame need for mounting?

The 60*60*25 mm frame uses the standard 60 mm fan mounting pattern with four corner holes spaced 60 mm centre-to-centre.

How do I connect the 2-pin power lead to a motherboard header?

Align the two-pin plug with the 24 V fan header key and press straight down; reversing the pins will prevent the fan from spinning.

When should the ball-bearing motor be replaced?

Expect the ball-bearing motor to run continuously for years; replace the unit when bearing noise appears or airflow drops below usable levels.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.