ABS
ABS R1315-4585PX rack server EPYC 4545P 32GB DDR5 2TB NVMe 16TB SATA
Tower workstation server with AMD EPYC 4545P 16-core CPU, 32 GB DDR5 ECC memory, 2 TB NVMe SSD and 16 TB SATA HDD
- WorkloadWorkstation
- TypeTower
- Server Scalability1-Way
- Redundant Hot-swap PowerNo
- CPU TypeAMD EPYC 4005 Series
- CPU Speed3.00 GHz
- 16-core AMD EPYC 4545P handles multi-threaded workloads
- 32 GB DDR5 ECC memory supports up to 192 GB
- 2 TB NVMe SSD plus 16 TB 7200 RPM SATA HDD
- Dual 1 GbE RJ45 ports with IPMI remote management
- Micro-ATX tower fits 1 x 3.5" and 2 x 2.5" drive bays
Tower server for workstation workloads
The ABS R1315-4585PX is a single-socket tower server built on an ASRock Rack B650D4U motherboard. It targets users who need a 16-core AMD EPYC 4545P running at 3.00 GHz with 64 MB cache for workstation tasks. The system ships with 32 GB of DDR5 ECC memory and a mix of NVMe and SATA storage.
Straightforward assembly with fixed power
The micro-ATX chassis holds a 400 W single supply and a Dynatron AM5 air cooler, so installation follows standard desktop steps. Memory slots use unbuffered DDR5 DIMMs and the two installed 16 GB modules occupy half the four slots. Drive bays accept one 3.5-inch and two 2.5-inch devices, but the power supply is not redundant and cannot be hot-swapped.
32 GB memory and hybrid storage headroom
The board supports up to 192 GB across four DDR5 slots, leaving room for three more modules. The 2 TB M.2 PCIe Gen 4 x4 NVMe drive handles the operating system and active projects, while the 16 TB 7200 RPM SATA hard drive provides bulk capacity. Dual 1 GbE ports give basic network connectivity.
Istaknuto
- 16-core AMD EPYC 4545P handles multi-threaded workloads
- 32 GB DDR5 ECC memory supports up to 192 GB
- 2 TB NVMe SSD plus 16 TB 7200 RPM SATA HDD
- Dual 1 GbE RJ45 ports with IPMI remote management
- Micro-ATX tower fits 1 x 3.5" and 2 x 2.5" drive bays
Specifikacije
| Brand | ABS |
|---|---|
| Series | 1-Socket Tower Server |
| Model | T2x15 |
| Workload | Workstation |
| Type | Tower |
| Server Scalability | 1-Way |
| Redundant Hot-swap Power | No |
| CPU Type | AMD EPYC 4005 Series |
| CPU Speed | 3.00 GHz |
| CPU Socket | AM5 |
| Number of CPU Cores | 16-Core Processor |
| # of Processors Installed | 1 |
| MAX Processors | 1 |
| Chipset | AMD B650 |
| Installed Memory Size | 32 GB |
| Memory Type | DDR5 |
| Max Memory Capacity | 192GB |
| Number of Memory Slots | 4 |
| Hard Drive (Installed) | 16TB |
| HDD Interface | SATA |
| SSD (Installed) | 2TB |
| Ethernet Controller | Dual 1GbE |
| Remote Management | IPMI |
| Operating System | No |
| Težina pošiljke | 10.30 kg |
| Dimenzije pakiranja | 610 × 572 × 368 mm |
Pitanja o ovom artiklu
How can I verify the EPYC 4545P 16-core processor is running at its 3.00 GHz base speed after setup?
Enter the BIOS on first boot and confirm the CPU shows 16 cores at 3.00 GHz, then run a stress test in your OS to see all cores sustain that frequency under load.
The server ships with a 2TB M.2 NVMe SSD and a 16TB 3.5" SATA HDD — what else do I need to buy to start using it?
Only an operating system licence and installation media are required; the 400W PSU, DDR5 ECC memory, CPU cooler, rails and all drive caddies are already installed.
Should I choose the configuration with 32GB DDR5 or add more modules now to reach the 192GB maximum?
Start with the installed 32GB (2 x 16GB DDR5 5600 ECC) if your workload fits; the board has two free DIMM slots so you can add matched pairs later without replacing the original sticks.
Također u ovoj kategoriji
Kupci su usporedili ovo
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
DELL J1-7490AA01 All-in-One PC Core i7-10700 2.9GHz 16GB 512GB SSD 23.8" FHD
- All-in-One PC
- All-in-One
HP J1-800G6AA01 All-in-One PC Core i5-10500 16GB DDR4 512GB NVMe 23.8
- All-in-One PC
- All-in-One



