저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

ABS

ABS R1315-4585PX rack server EPYC 4545P 32GB DDR5 2TB NVMe 16TB SATA

SKU CH-1DDY-E2YYF MPN R1315-4585PX

Tower workstation server with AMD EPYC 4545P 16-core CPU, 32 GB DDR5 ECC memory, 2 TB NVMe SSD and 16 TB SATA HDD

  • WorkloadWorkstation
  • TypeTower
  • Server Scalability1-Way
  • Redundant Hot-swap PowerNo
  • CPU TypeAMD EPYC 4005 Series
  • CPU Speed3.00 GHz
  • 16-core AMD EPYC 4545P handles multi-threaded workloads
  • 32 GB DDR5 ECC memory supports up to 192 GB
  • 2 TB NVMe SSD plus 16 TB 7200 RPM SATA HDD
  • Dual 1 GbE RJ45 ports with IPMI remote management
  • Micro-ATX tower fits 1 x 3.5" and 2 x 2.5" drive bays

Tower server for workstation workloads

The ABS R1315-4585PX is a single-socket tower server built on an ASRock Rack B650D4U motherboard. It targets users who need a 16-core AMD EPYC 4545P running at 3.00 GHz with 64 MB cache for workstation tasks. The system ships with 32 GB of DDR5 ECC memory and a mix of NVMe and SATA storage.

Straightforward assembly with fixed power

The micro-ATX chassis holds a 400 W single supply and a Dynatron AM5 air cooler, so installation follows standard desktop steps. Memory slots use unbuffered DDR5 DIMMs and the two installed 16 GB modules occupy half the four slots. Drive bays accept one 3.5-inch and two 2.5-inch devices, but the power supply is not redundant and cannot be hot-swapped.

32 GB memory and hybrid storage headroom

The board supports up to 192 GB across four DDR5 slots, leaving room for three more modules. The 2 TB M.2 PCIe Gen 4 x4 NVMe drive handles the operating system and active projects, while the 16 TB 7200 RPM SATA hard drive provides bulk capacity. Dual 1 GbE ports give basic network connectivity.

주요 특징

  • 16-core AMD EPYC 4545P handles multi-threaded workloads
  • 32 GB DDR5 ECC memory supports up to 192 GB
  • 2 TB NVMe SSD plus 16 TB 7200 RPM SATA HDD
  • Dual 1 GbE RJ45 ports with IPMI remote management
  • Micro-ATX tower fits 1 x 3.5" and 2 x 2.5" drive bays

사양

BrandABS
Series1-Socket Tower Server
ModelT2x15
WorkloadWorkstation
TypeTower
Server Scalability1-Way
Redundant Hot-swap PowerNo
CPU TypeAMD EPYC 4005 Series
CPU Speed3.00 GHz
CPU SocketAM5
Number of CPU Cores16-Core Processor
# of Processors Installed1
MAX Processors1
ChipsetAMD B650
Installed Memory Size32 GB
Memory TypeDDR5
Max Memory Capacity192GB
Number of Memory Slots4
Hard Drive (Installed)16TB
HDD InterfaceSATA
SSD (Installed)2TB
Ethernet ControllerDual 1GbE
Remote ManagementIPMI
Operating SystemNo
배송 무게10.30 kg
포장 크기610 × 572 × 368 mm

이 상품에 대한 질문

How can I verify the EPYC 4545P 16-core processor is running at its 3.00 GHz base speed after setup?

Enter the BIOS on first boot and confirm the CPU shows 16 cores at 3.00 GHz, then run a stress test in your OS to see all cores sustain that frequency under load.

The server ships with a 2TB M.2 NVMe SSD and a 16TB 3.5" SATA HDD — what else do I need to buy to start using it?

Only an operating system licence and installation media are required; the 400W PSU, DDR5 ECC memory, CPU cooler, rails and all drive caddies are already installed.

Should I choose the configuration with 32GB DDR5 or add more modules now to reach the 192GB maximum?

Start with the installed 32GB (2 x 16GB DDR5 5600 ECC) if your workload fits; the board has two free DIMM slots so you can add matched pairs later without replacing the original sticks.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.