SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
Acumen Disc
Standalone SD and MicroSD duplicator copies one source to 15 targets at up to 100 MB/s with DoD-compliant erase modes
The Acumen Disc SD 3.0 Elite AD15-SDC100 is a standalone duplicator for Secure Digital and MicroSD cards. It copies from one source slot to fifteen destination slots without a computer connection. The unit targets high-volume cloning and sanitisation workflows in forensic, industrial and archival environments. Operation is managed through a 16 x 2 LCD panel.
The duplicator runs from an internal AC supply rated for 115-230 V at 50/60 Hz. No external host or software is required, so the system draws power only during active copy or erase cycles. The 128 MB buffer memory allows each channel to operate asynchronously, reducing sustained load on the controller. Noise and thermal output remain low in typical office or lab settings.
Two dedicated media slots accept full-size SD and MicroSD cards directly, removing the need for adapters. The standalone design frees up a workstation and eliminates host-interface bottlenecks. Supported erase modes include DoD 3-pass and 7-pass to the 5220.22-M standard for data sanitisation. Format options cover Auto, FAT and FAT32 structures.
| Brand | Acumen Disc |
|---|---|
| Model | Acumen Disc SD 3.0 Elite |
| Part Number | AD15-SDC100 |
| Type | SD/MicroSD Duplicator |
| Target | 1 to 15 |
| Controller | Acumen Disc |
| Buffer Memory | 128M |
| Supported Media | Secure Digital (SD) / MicroSD TF |
| Data Transfer Rate | 6GB/min |
| Data Source ROM | 1 SD Slot for Source Reading |
| Data Destination Burner | 15 SD Slots for SD to SD Copy |
| Display | 16 x 2 LCD |
| Operating Type | Standalone |
| Panel Color | Black |
| Load Type | Slot |
| Power Supply | AC: 115-230 V, 50/60 Hz |
| Package Contents | see pictures for details |
Connect the unit to 115-230 V AC power, insert the source SD card into the single source slot and up to 15 target cards into the destination slots, then use the 16 x 2 LCD menu to select copy mode; the step often missed is choosing between System-and-Files Quick Copy or Whole-Media Full Copy before starting.
The SD card slots are rated for repeated insertion cycles; keep them free of dust and debris, and if a slot becomes loose or fails to read cards reliably, the slot module can be replaced by a technician.
The 128 MB buffer memory and the 100 MB per second per channel transfer rate set the practical ceiling; actual sustained throughput depends on the speed class of the SD or MicroSD media being used.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Nema odgovarajućeg jezika.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?