Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
AZZA
Four 120 mm fans with hydro bearings deliver 49.1 CFM at up to 1800 RPM while staying at 26.29 dB(A), and addressable ARGB lighting runs through the full acrylic frame
The AZZA Hurricane III Digital ARGB set includes four 120 mm case fans and a dedicated hub. Each fan uses a hydro bearing and runs between 1000 and 1800 RPM. The acrylic frame carries addressable LEDs on a dual-ring layout. A 4-pin PWM connector powers the motor while a 5 V 3-pin header drives the lighting.
This kit suits builders who want co-ordinated ARGB illumination across multiple intake or exhaust positions without buying separate controllers. The included hub provides seven 3-pin ARGB ports and six 4-pin PWM ports. Systems that lack a 5 V addressable RGB header on the motherboard cannot control the lighting effects.
Maximum airflow reaches 49.1 CFM with a static pressure of 1.91 mmH2O. Noise stays at 26.29 dB(A) at full speed. These figures determine whether the fans can move enough air through restrictive radiators or dense mesh panels for a given thermal target.
| Brand | AZZA |
|---|---|
| Series | HURRICANE III |
| Part Number | FNAZ-12DRGB3-011 |
| Fan Counts | 4 Fans |
| Fan Controller | Controller |
| Type | Case Fan |
| Fan Thickness | 25mm |
| Bearing Type | Hydro Bearing |
| RPM | 1000-1800±10% RPM |
| Air Flow | 49.1CFM |
| Noise Level | 26.29 dB(A) |
| Power Connector | 4 Pin |
| Color | Black |
| LED | ARGB |
| Dimensions | 120x120x25 mm |
This model is sold only as a four-fan kit with the controller hub included, so you get matching fans and the hub in one box.
At maximum speed the fans move 49.1 CFM with 1.91 mmH₂O static pressure, enough for typical case intake or exhaust while staying at 26.29 dB(A).
Yes, the hub includes a 5 V 3-pin WS2812B addressable RGB connector that plugs directly into a standard motherboard 5 V ARGB header.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?