Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Four black 120mm case fans with translucent frames and ARGB lighting, plus a controller hub

AZZA

AZZA HURRICANE III DIGITAL ARGB 120mm 4-pack case fan

SKU CH-RA8C-YFD3Q

Four 120 mm fans with hydro bearings deliver 49.1 CFM at up to 1800 RPM while staying at 26.29 dB(A), and addressable ARGB lighting runs through the full acrylic frame

  • Fan Counts4 Fans
  • Fan ControllerController
  • TypeCase Fan
  • Fan Thickness25mm
  • Bearing TypeHydro Bearing
  • RPM1000-1800±10% RPM
  • Four fans deliver 49.1 CFM airflow each
  • Hydro bearing runs at 26.29 dB(A) for quiet operation
  • PWM control spans 1000 to 1800 RPM for flexible speed
  • Dual-ring addressable RGB lights entire frame evenly
  • Included hub connects seven ARGB and six PWM devices

Four-Fan ARGB Kit with Controller

The AZZA Hurricane III Digital ARGB set includes four 120 mm case fans and a dedicated hub. Each fan uses a hydro bearing and runs between 1000 and 1800 RPM. The acrylic frame carries addressable LEDs on a dual-ring layout. A 4-pin PWM connector powers the motor while a 5 V 3-pin header drives the lighting.

Builders Who Want Synchronised Lighting

This kit suits builders who want co-ordinated ARGB illumination across multiple intake or exhaust positions without buying separate controllers. The included hub provides seven 3-pin ARGB ports and six 4-pin PWM ports. Systems that lack a 5 V addressable RGB header on the motherboard cannot control the lighting effects.

49.1 CFM Airflow at 26.29 dB(A)

Maximum airflow reaches 49.1 CFM with a static pressure of 1.91 mmH2O. Noise stays at 26.29 dB(A) at full speed. These figures determine whether the fans can move enough air through restrictive radiators or dense mesh panels for a given thermal target.

I korthet

  • Four fans deliver 49.1 CFM airflow each
  • Hydro bearing runs at 26.29 dB(A) for quiet operation
  • PWM control spans 1000 to 1800 RPM for flexible speed
  • Dual-ring addressable RGB lights entire frame evenly
  • Included hub connects seven ARGB and six PWM devices

Specifikationer

BrandAZZA
SeriesHURRICANE III
Part NumberFNAZ-12DRGB3-011
Fan Counts4 Fans
Fan ControllerController
TypeCase Fan
Fan Thickness25mm
Bearing TypeHydro Bearing
RPM1000-1800±10% RPM
Air Flow49.1CFM
Noise Level26.29 dB(A)
Power Connector4 Pin
ColorBlack
LEDARGB
Dimensions120x120x25 mm

Frågor om den här produkten

Should I buy the four-fan kit or look for a different pack size?

This model is sold only as a four-fan kit with the controller hub included, so you get matching fans and the hub in one box.

What does the 49.1 CFM airflow figure mean for my build?

At maximum speed the fans move 49.1 CFM with 1.91 mmH₂O static pressure, enough for typical case intake or exhaust while staying at 26.29 dB(A).

Will the 5 V 3-pin ARGB connector work with my motherboard's 5 V addressable header?

Yes, the hub includes a 5 V 3-pin WS2812B addressable RGB connector that plugs directly into a standard motherboard 5 V ARGB header.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.